Normal view

There are new articles available, click to refresh the page.
Before yesterdayMain stream

Liquid Gets 3,400 BTC Back After On-Chain Talks; White Hats Keep 598.5 BTC

By: Juan Galt
7 September 2026 at 18:02

Bitcoin Magazine

Liquid Gets 3,400 BTC Back After On-Chain Talks; White Hats Keep 598.5 BTC

The “White hat” party that withdrew nearly 4,000 bitcoin from the Liquid Network federation wallet on Sunday returned 3,400 BTC to the wallet on Monday. About 598 BTC, or 15% of the consolidated pile, stayed at the same holder address as an implied bounty fee worth 48 million dollars.

The return transaction (bc49a46d), confirmed at 16:09 UTC on September 7. It returned exactly 3,400 BTC to the labeled Liquid peg script address and sent the 598.5 BTC change back to the “White hat” hacker address as change. 

The transfer followed a day of messages written into Bitcoin blocks. The White hats first published transaction on chain with a message in the OP_RETURN arbitrary data field “contact us on chain”; the message came from the address holding the 4000 BTC taken from the Liquid Network. 

A Blockstream-linked address answered with “Please contact security@blockstream.com”. Later notes from that sender carried Electrum-encrypted payloads and PGP signatures that can be verified against Blockstream’s published security key.

In block 965869, the White hats asked in the clear text whether sending “most” back to the federation script was acceptable. The 1,000-sat output on that transaction was only a message carrier. 

Soon after, the White hats wrote “Please fix the bug first. The chain is under risk at latest commit right now. Make sure every node is patched. Then we will transfer the money back safely after confirming the fix.” followed by an encrypted blurb of text to Blockstream’s PGP key

In the same block, a clear-signed reply from the Blockstream sender said “Yes, thank you.” Hours later, the same Blockstream posted another clear-text note: “Bridge nodes are patched, safe to return the funds”. 

Minutes after the 3,400 BTC landed. The white hats sent back 85% of the funds, keeping 15% as an implied finder’s fee. The choice was celebrated by some on X as ‘better than keeping 100%’ while others were a bit shocked at the amount. While 15% might sound reasonable, the total sum is so large that it nears $50 million at today’s prices. Blockstream was clearly not happy about the finder’s fee, as four encrypted messages followed onchain a few hours later, likely after the main fires had been put out at the office and the lawyers had a chance to have a say in the matter. An hour later, one more encrypted message was posted from Blockstream.

The White hats replied with two encrypted messages. Blockstream replied once an hour later. Then the White hats published a simple yet meaningful “ 🙁 ” sad face emoji. This emoji does a lot of work. It suggests that negotiations did not go well over reducing the size of the bounty. Blockstream wizards are clearly ‘big mad’ about the size of that finder’s fee. What exactly was said in those encrypted messages is not known and Blockstream has made no public statements on the matter. But we can only assume the saga is not over.

The full chat can be easily followed on this vibe-coded site (by yours truly). A couple of other researchers are keeping tabs on the conversation and on-chain data, such as Sjors’s GitHub gist and Alex Thorn from Galaxy Research

Liquid’s Sunday statement is still the network’s last official account post: purported whitehats withdrew about 4,000 BTC through the SideSwap peg-out path, the PAK itself was not compromised, other issued assets were unaffected, and the sidechain was paused. Liquid and Blockstream had not posted a new statement on the 3,400 BTC return as of this writing. SideSwap had said the L-BTC in the original peg-out “came from an Elements bug.” 

This post Liquid Gets 3,400 BTC Back After On-Chain Talks; White Hats Keep 598.5 BTC first appeared on Bitcoin Magazine and is written by Juan Galt.

Alleged White-Hat Hackers Withdraw 4,000 bitcoin from Blockstream’s Liquid Network Federation Reserves

By: Juan Galt
6 September 2026 at 18:16

Bitcoin Magazine

Alleged White-Hat Hackers Withdraw 4,000 bitcoin from Blockstream’s Liquid Network Federation Reserves

The Liquid Network said Sunday that purported white-hat hackers withdrew about 4,000 bitcoin, worth about $320 million, from the federation wallet that backs L-BTC. Bridge nodes were disabled, and the sidechain was paused. Other issued assets, including USDT, DePix and RWAs, were unaffected, the official account said on X.

The Liquid Network is a federated sidechain of Bitcoin, founded by Adam Back’s Blockstream. The Liquid chain issues a variety of assets such as LBTC, which it backs with BTC on the Bitcoin main chain, held in a large multisig of 15 corporate and known members. 11 of the 15 members need to sign a valid multi-signature transaction to move coins from the treasury. Before the hack, the treasury held over 4200 BTC; after the hack, Blockstream’s proof of reserves page reports a little over 207 BTC left. 

The hackers withdrew 4,019.4 BTC from the reserve address in a peg-out transaction using the SideSwap Peg-out Authorization Key. SideWap is a bridge exchange and a member of the Liquid Federation. While details on the mechanism of the hack are not confirmed yet, it appears an inflation bug on the LBTC side chain was exploited by the hackers to create over 4,000 LBTC that did not exist before, and cash them out for on-chain bitcoin from the federation. Because the transaction appeared as valid, given the consensus bug, the federation members’ HSM security servers signed the BTC withdrawal transaction, worth roughly 320 million at the time. 

The hacker moved the funds to an address ending in 6gyqjlte, from which they quickly signed a new transaction with a message on the OP_RETURN arbitrary data field saying “we are whitehats. contact us on chain.” Those coins were still at that address at the time of writing.

A small mainnet transaction to the hacker address followed by an OP_RETURN saying “Please contact security@blockstream.com”, presumably from a Blockstream public address, though that remains unconfirmed. A later OP_RETURN spend from the hacker address carried “Please contact us on Signal @m671aw.70”, however, this may be spam and does not share a link to the address with the stolen funds.

In response to the breach, exchanges were told to pause L-BTC deposits and withdrawals. Bridge nodes on the Liquid Network have been paused, limiting access to the side chain, which continues to produce blocks. 

JAN3 CEO Samson Mow said Aqua’s Liquid features were affected and that on-chain bitcoin still worked. Other wallets in the industry that use the Liquid Network are expected to be affected. Users holding LBTC now effectively have their savings at risk, since the underlying BTC is currently not redeemable. Given the private nature of the Liquid chain, user onchain analytics are scarce and not much public information is known about how much LBTC is held by retail users versus corporations of Blockstream itself. Nevertheless, should the funds not be returned, it would be a heavy blow to the Liquid Network’s user base.

Users of LBTC don’t have many options but to wait for conversations with the hackers to resolve. Given the size of the hack, it would be difficult for the hackers to get away with stealing all that bitcoin, though perhaps not impossible. What may happen is that the hackers ask for a finder’s fee and return the majority of the funds. 

This post Alleged White-Hat Hackers Withdraw 4,000 bitcoin from Blockstream’s Liquid Network Federation Reserves first appeared on Bitcoin Magazine and is written by Juan Galt.

Software Defined Radio (SDR) for Hackers: Choosing the Best Hardware for SDR

By: OTW
3 August 2026 at 16:53

Welcome back, my aspiring RF hackers!

Before embarking upon the study of SDR for Hackers it is good idea to take a close look at the options available for hardware in this field. Of course, you will need a computer with a USB port but there are numerous options available for the radio receiver/transceiver. Let’s take a look at the specs and advantages and disadvantages each of the most common hardware options for software defined radio (SDR).

USRP

USRP is open-source hardware, firmware and host code making it an excellent choice for developers. USRP has multiple models with varying interfaces and sizes. The USRP X series uses 10g Ethernet interface, the USRP N series uses iG Ethernet, the USRP B series uses USB 2.0 (old) interface and USB 3.0 (new) and the USRP E series has a built in ARM processor and does not need a host computer.

The USRP B series is a favorite among developers as it uses USB 3.0 and the USRP B200mini is the size of a business card.

RTL-SDR

The RTL-SDR is among the most popular among hobbyists. It is low-cost, very capable and a good place to start in SDR for Hackers without making a major investment (less than $40).

It is based upon the DVB-T dongle that uses the RTL2832U chip. This dongle was originally used to watch TV on computers. The RTL-SDR supports many pieces of software based upon the library librtlsdr.

The RTL-SDR can be used to analyze signals and in combination with the HDSDR software can be used for a multitude of purposes.

The strength of the RTL-SDR is its low cost. The weakness of the RTL-SDR is that it is only a receiver and can not transmit signals such as in replay attacks.

 

HackRF

HackRF is great choice for beginners looking for an inexpensive SDR hardware that can both transmit and receive. Many “SDR for Hackers” projects require transmitting such as replay attacks.

HackRF is all open-source including its schematic diagram, PCB diagram, driver code, and single chip firmware. HackRF supports frequencies from 1MHz- 6Ghz. HackRF is only capable of transmitting and receiving at half-duplex, a major drawback for high performance systems.

 

BladeRF

BladeRF is a high performance hardware for the SDR for Hackers. Unlike HackRF, it is full-duplex making it ideal for high performance applications such as OpenBTS (OpenBTS is an open-source cellular base station). It’s only drawback is its frequency range. The BladeRF is only capable of sending and receiving radio frequencies to 3.8Ghz.

 

LimeSDR

LimeSDR is open-source, apps enabled SDR platform. It is capable of receiving and transmitting UMTS, LTE, GSM, LoRa, Bluetooth, Ziggbee, RFID and Digital Broadcasting and more.

One of the great strengths of LimeSDR is being apps enabled. LimeSDR is integrated into the Snappy Ubuntu core and anyone capable downloading and using an app can use the LimeSDR. This makes its capabilities available to a much wider audience. EE, the UK’s largest mobile operator is distributing LimeSDR to educational institutions for training and development. Apps available for the LimeSDR include;

  • Radio astronomy
  • RADAR
  • 2G to 4G cellular base station
  • Media streaming
  • IoT gateway
  • HAM radio
  • Wireless keyboard and mice emulation and detection
  • Tire pressure monitoring systems
  • Aviation transponders
  • Utility meters
  • Drone command and control
  • Test and measurement

SDRplay RSPdx

The SDRplay RSPdx offers the user a better dynamic range and sensitivity than the RTL-SDR dongles. This becomes important in crowded RF spaces or where the signals are weak.

The SDRplay is excellent for aircraft tracking, receiving NOAA weather satellite images, listening to FM radio, and receiving weather balloon telemetry, and scanning trunked radio systems.

LibreSDR

The LibreSDR is one of the newest SDR’s on the market. It is a USRP B220 clone making it a powerful transceiver for all types of SDR work. It uses the AD9361 RF transceiver, the same as the Ettus Research USRP b210/220. This makes it ideal for private cellular network development, RF experimentation, and signal analysis. The LibreSDR is popular as the core of cellular cores like Open5GS and srsRAN. Since they are clones of the USRP they get the performance of these advanced SDR’s without the high-cost.

 

Specification Comparison

 

Summary

These seven hardware platforms offer a wide-range of capabilities and prices for the hacker looking to get into SDR. We recommend RTL-SDR for those just starting out and on a limited budget. For those looking to hack radio signals, you will likely need a transceiver and the HackRF One is an excellent platform at a reasonable price. Those needing high performance and full duplex will likely want to spend a little extra and buy the BladeRF or the LibreSDR For those looking for a simple to use set-up and application, LimeSDR might be your best choice.

 
 

The post Software Defined Radio (SDR) for Hackers: Choosing the Best Hardware for SDR first appeared on Hackers Arise.

❌
❌